Celly FLIP3 Bruksanvisning
Celly
Hodetelefoner
FLIP3
Les nedenfor 📖 manual på norsk for Celly FLIP3 (23 sider) i kategorien Hodetelefoner. Denne guiden var nyttig for 17 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 9 brukere
Side 1/23
Read this user manual and in particular
the safety notes, before using the pro-
duct. Keep the user manual for future re-
ference and include it when passing the
product on to third parties.
Esprinet S.p.A. will not in any way be
held responsible for injury or damage
caused to persons or property arising
from misuse of the product.
Warnings
Avoid listening at extreme volumes, par-
ticularly for prolonged periods of time
when using the product.
If you use the product at an excessively
high volume, you could permanently da-
mage your hearing. Listen at a moderate
volume. Audio warnings, alerts and en-
vironmental noises may sound different
when wearing the product. Be aware of
how these signals differ in terms of their
sound so that you are able to recognize
the signals in corresponding situations.
Do not use the product when driving
motor vehicles, cycling, when operating
machines or in other situations where
impaired awareness of noises in your
surroundings could pose a risk to you or
others. At the same time, also observe
the legal regulations and provisions in
the country where you use the product.
To prevent malfunction or damage to the
product, avoid accidental falls, do not
crush, puncture or exercise a high level
of pressure on the product.
Keep the product away from humidity,
water or other liquids. Do not store or
expose your product to any source of
heat, direct sunlight, radiators, stoves
or other heat sources such as the dash-
board of your car in the summer. Do not
try to modify, repair or disassemble the
product.
Do not use a damaged product.
Do not under any circumstances use
aggressive cleaning agents, alcohol or
other chemical solutions for cleaning as
they can damage the housing or even
impair the functionality of the product.
Do not immerse the product in water or
other liquids. There are no serviceable
parts inside the product. Never open/
disassemble it. Keep the product out of
reach of children. Never allow children or
persons with disabilities to use electrical
products without supervision. Make sure
that children do not play with the plastic
wrapping. They may swallow it when
playing and suffocate.
Make sure children do not remove any
small parts from the product and play
with them.
Reload
When using for the first time, charge
the battery to maximum capacity. To
recharge, plug the charging cable into
the product’s charging port. A red light
positioned outside the charging box will
begin to flash, indicating the progressi-
ve charging of the product. When all the
lights stop flashing, the charging will be
completed.
Pairing
The earphones, once removed from the
case, will automatically turn on and a
green light will start flashing on the left
earphone. The earphones must be con-
nected to the device within 5 minutes or
they will go into power saving mode. To
activate pairing mode again, simply pla-
ce the earphones in the charging case,
close it and wait a few seconds before
reopening it, following the above pro-
cedure again. At this point activate the
wireless function on the device, search
for FLIP3, select it once identified and
connect it. You will hear “CONNECTED”
sound when pairing is completed. If
prompted for a password, enter “0000”.
Automatic reconnection
Once the headset and device are paired,
they will automatically reconnect when
the wireless feature of your device is on
and within range.
MONO / STEREO operation
Only one headset can be used for mu-
sic playback or for making calls. This
earphones. To use this function, remo-
veonly one earphone from the charging
box. If you want to switch to stereo
mode, you can also remove the second
earphone at any time. Conversely, if you
want to switch to mono mode, put a he-
adset in the charging box at any time.
Multifunction buttons
Play/Pause: Single click – Left or right
earbud
Reply/end calls: Double click - Left or
right earbud
Refuse calls: Long press – Left or right
earbud
Previous track: Double click – Left ear-
bud
Next track: Double click – Right earbud
Volume -: Long press – Left earbud
Volume +: Long press – Right earbud
Volume assistant: Triple click – Left or
right earbud
Automatic shutdown
1. If connected to a device, after discon-
necting the connection, the headset will
automatically turn off after 5 minutes.
2. If you don’t connect the device when
the green light flashes, the headset will
automatically shut down in 5 minutes.
Pairing between left and right earphones
If the connection between the left and
right earphones is lost, put both earpho-
nes back inside the charging box, close
it and wait a few seconds before reope-
ning it. The earphones will automatically
reconnect to each other. If the process
just described does not work, discon-
nect the earphones from your device,
wait a few minutes, then reconnect them
(the earphones must be placed inside
the charging box). For both procedures,
it is necessary that the earphones inside
the charging box are charging, so make
sure that the charging box has a suffi-
cient charge level to ensure the charging
of the earphones.
Maintenance
1. Do not use abrasive solvents to clean
the product;
2. Do not attack the product with any
kind of sharp object as it may scratch or
damage the product;
3. Keep the product away from high tem-
peratures, dust and humidity.
Specifications
-
This marking on the product or its
packaging means that the product at the
end of its life, inlcuding the unremovable
battery, must be separated from other
types of waste to recycle it responsibly.
Safely’s use of this product is guarante-
ed from the respect of this instructions
manual, keep it and carefully use it for all
life of the product. The product doesn’t
need any kind of technical maintenance,
NEVER DISASSEMBLE IT. The battery
inside the product is integrated and
not replaceable. Don not try to remo-
included in inside the product because
can produce overheat’s danger, burning
and injury. The battery must be removed
only by qualified professional techin-
cians, that are able to remove it without
any kind of danger and to recycle it in
the respect of the law. Users should give
free end of life product into the local se-
parate collection centers or to the retai-
ler, in reason of one to one, or free if the
product size is bigger than 25 cm. Ade-
quated waste disposal permit to award
the product to recycling, treatment with
ecofriendy compatible disposal conduce
to prevent possible harm to the envi-
ronment or human health and promo-
te the reuse and/or product materials
recycling. Unauthorized waste disposal
of electronic product, cell and battery
from houseold user involve currency le-
gislation sanctions.
has the CE mark and is therefore com-
pliant with the safety standards establi-
shed by the European Union.
For info and contact, please write to:
contact@esprinet.com
DECLARATION OF CONFORMITY
Esprinet SpA declares that the product
-
ve. The complete text of the EU decla-
ration of conformity is available at the
following Internet address:
https://xchange.esprinet.com/comp/cel-
User manual
Model: FLIP3
EN
ly/FLIP3.pdf
Celly® is a trademark owned by Esprinet S.p.A.
All brands are registered trademarks of their
respective owners.
-
Made in China.
www.celly.com
Produkspesifikasjoner
| Merke: | Celly |
| Kategori: | Hodetelefoner |
| Modell: | FLIP3 |
Trenger du hjelp?
Hvis du trenger hjelp med Celly FLIP3 still et spørsmål nedenfor, og andre brukere vil svare deg
Hodetelefoner Celly Manualer
2 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
Hodetelefoner Manualer
- Miiego
- Adidas
- SoundPEATS
- Trevi
- Mixx
- Cayin
- Lindy
- Polsen
- NuPrime
- Urbanista
- Topping
- Olive
- Denon
- Xiaomi
- Meliconi
Nyeste Hodetelefoner Manualer
10 April 2025
4 April 2025
3 April 2025
2 April 2025
2 April 2025
31 Mars 2025
31 Mars 2025
31 Mars 2025
31 Mars 2025
29 Mars 2025