CyberPower BU1000ELCD Bruksanvisning
CyberPower
UPS
BU1000ELCD
Les nedenfor 📖 manual på norsk for CyberPower BU1000ELCD (2 sider) i kategorien UPS. Denne guiden var nyttig for 15 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 8 brukere
Side 1/2
Copyright © 2018 Cyber Power Systems, Inc. All rights reserved.
User’s Manual
BU600ELCD
BU LCD800E
BU LCD1000E
K01 C000492 00- -
IMPORTANT INSTRUCTIONSSAFETY
(SAVE THESE INSTRUCTIONS)
This manual contains important safety instructions. Please read and follow all instructions carefully during
installation and operation of the unit. Read this manual thoroughly before attempting to unpack, install, or
operate your UPS.
CAUTION! To prevent the risk of fire or electric shock, install in a temperatur and humiditye controlled indoor
area free of conductive contaminants. (See the specifications for the acceptable temperature and humidity
range.)
CAUTION! To reduce the risk of overheating the UPS, do not cover the UPS' cooling vents and avoid exposing
the unit to direct sunlight or installing the unit near appliances such as space heaters or furnaces.heat emitting
CAUTION! - - -Do not attach non computer related items, such as medical equipment, life support equipment,
microwave ovens, or vacuum cleaners to UPS.
CAUTION! Do not plug the UPS input into its own output.
CAUTION! Do not allow liquids or any foreign object to enter the UPS. Do not place beverages or any other
liquid- containing vessels on or near the unit.
CAUTION! In the event of an emergency, press the OFF button and disconnect the power cord from the AC
power supply to properly disable the UPS.
CAUTION! Do not attach a power strip or surge suppressor to the UPS.
CAUTION! Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
CAUTION! Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries
and the required precautions. Keep unauthorized personnel away from batteries.
CAUTION! The battery supply should be therefore disconnected in the plus minus poleand at the quick
connectors of the battery when maintenance or service work inside the UPS is necessary.
CAUTION! - -Internal battery voltage is 12Vdc. Sealed, lead acid, 6 cell battery.
CAUTION! When replacing the batteries, use the same number and type of batteries.
CAUTION! Do not dispose of batteries in a fire. The battery may explode. Do not open or mutilate the battery or
batteries. Released electrolyte is harmful to the skin and eyes.
INSTALLING YOUR UPS SYSTEM
UNPACKING
The box should contain the User Manualfollowing :(1)UPS Unitx1 2); ( x1
OVERVIEW
The BU provides automatic voltage regulation for inconsistent utility power, and provides 600/80 /1000E0 LCD
battery backup during power outages. consistent power to your computer The 600/80 /1000E ensures BU 0 LCD
system.
HARDWARE INSTALLATION GUIDE
1. Your new UPS may be used immediately upon receipt. However, recharging the battery for at least 8 hours
is recommended to ensure that the battery's maximum charge capacity is achieved. Charge loss may occur
during shipping and storage. To recharge the battery, simply leave the unit plugged into an AC outlet. The
unit will charge in both the on and off position.
2. With the UPS unit off and unplugged, connect the computer, monitor, and any externally powered data
storage device (Zip drive, Jazz drive, Tape drive, etc. into the battery power supplied outlets. ) DO NOT
plug a laser printer, copier, space heater, vacuum, paper shredder or other large electrical device
into the battery power supplied outlets. The power demands of these devices will overload and
possibly damage the unit.
3. Plug the UPS into a 2 pole, 3 wire grounded receptacle (wall outlet). Make sure the wall branch outlet is
protected by a fuse or circuit breaker and does not service equipment with large electrical demands (e.g. air
conditioner, refrigerator, copier, etc . Avoid using extension cords.)
4. Press the power switch to turn the unit on. The power on indicator light will illuminate and the unit will
"beep".
5. If an overload is detected, an audible alarm will sound and the unit will emit one long beep. To correct this,
turn the UPS off and unplug at least one piece of equipment from the battery power supplied outlets. Wait
10 seconds. Make sure the circuit breaker / fuse and then turn the UPS on. is normal s
6. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times.
7. To store your UPS for an extended period, cover it and store with the battery fully charged. Recharge the
battery every three months to ensure battery life.
BASIC OPERATION
1. Power Switch
Press the switch for 2 seconds to turn the UPS ON or OFF.
Alarm setting: The audible alarm can be turned OFF or ON by quickly pressing the POWER button
twice. The default setting is for the Alarm On. To turn the Alarm Off, quickly press the power button
twice. You will hear two short beeps when the Alarm is turned off. To turn the Alarm back on, quickly
press the power button twice. You will hear a single short beep when the Alarm is turned on.
2. Led Indicators
LED is illuminated when the UPS . is working
3. Input Power Cord Connect to utility power.
4. Input Circuit Breaker(BU1000ELCD only)
T he circuit breaker provides optimal overload protection.
5. LCD Display
High resolution and intelligent LCD display shows all the UPS icons and messages. For information with
more information please review the “Definitions for Illuminated LCD Indicators” section.
6. AC outlet
The UPS provides outlets for connected equipment to insure temporary uninterrupted operation during a
power failure and against surges and spikes.
DEFINITIONS FOR ILLUMINATED LED INDICATORS
LED
Alarm
Condition
On Off Normal
Flash Beep Twice Utility Failure - The UPS is providing battery power to outlets.
Flash Rapid
Beeping
Utility Failure - The UPS is providing battery power. The rapid beeps indicate
the battery will run out of power shortly.
On/Flash Constant
Tone
Overload - Occurs when connected equipment exceeds the rating of the unit.
Turn the UPS off and unplug at least one piece of equipment from the UPS.
Produkspesifikasjoner
| Merke: | CyberPower |
| Kategori: | UPS |
| Modell: | BU1000ELCD |
Trenger du hjelp?
Hvis du trenger hjelp med CyberPower BU1000ELCD still et spørsmål nedenfor, og andre brukere vil svare deg
UPS CyberPower Manualer
29 Januar 2025
28 Januar 2025
28 Januar 2025
28 Januar 2025
28 Januar 2025
28 Januar 2025
16 Januar 2025
13 Januar 2025
13 Januar 2025
4 Januar 2025
UPS Manualer
- PowerWalker
- AEG
- V7
- FSP/Fortron
- Hikvision
- LevelOne
- Equip
- Phoenix Contact
- Tripp Lite
- Block
- IKEA
- Salicru
- Jung
- Apc
- Conceptronic
Nyeste UPS Manualer
9 April 2025
9 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
7 April 2025
3 April 2025