Infinity REF5032CF Bruksanvisning

Infinity Høyttaler REF5032CF

Les nedenfor 📖 manual på norsk for Infinity REF5032CF (2 sider) i kategorien Høyttaler. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/2

3-7/8"

98mm

5-1/8"

129mm

3-3/16"

80mm

4-3/4"

120mm

2-1/4"

57mm

9/16"

29mm

1-3/4"

44mm

R E F E R E N C E

5032i

5032cf

5032gr

Designed and engineered in the USA. Conception et design aux É.U.A.

A valid serial number is required for warranty coverage.Un numéro de série valable est exigé pour la couverture de la garantie.

Features,specifications and appearance are subject to change without notice.

Les dispositifs, les caractéristiques et l’aspect sont sujets au changement sans communication préalable.

Harman International, Consumer Division,8500 Balboa Boulevard, Northridge, CA 91329 USA

www.infinitysystems.com

Infinity is a trademark of Harman International Industries, Incorporated,registered in the United States and/or other countries.

Infinity est une marque commerciale de Harman International Industries,Incorporated,déposée aux États-Unis et/ou dans d’autres pays.

Declaration of Conformity

We,Harman Consumer Group, Inc.

2, route de Tours

72500 Château du Loir

France

declare in own responsibility that the products described in this owner’s

manual are in compliance with technical standards:

EN 61000-6-3:2001

EN 61000-6-1:2001

Klaus Lebherz

Harman Consumer Group,Inc.

Château du Loir,France 1/09

5032i 5032cf

BL (T-m) 3.25 3.25

DCR (ohms) 2.30 2.30

Mms (g) 10.22 10.22

Sd (sq cm) 103.9 103.9

Cms (μm/N) 521 521

Vas (l) 7.89 7.89

Fs (Hz) 69.0 69.0

Qes 0.96 0.96

Qms 6.94 6.94

Qt 0.85 0.85

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product,please visit us at

www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product,please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf” version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf” version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf” version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf” version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Y

our local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit

us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your

local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us

at www.infinitysystems.com.

SPECIFICATIONS

5032i 5032cf 5032gr

Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY

2-Way 2-Way for 5-1/4" (130mm)

NO GRILLE

Impedance: 2 Ohms 2 Ohms

Power Handling,RMS: 45W 45W

Power Handling,Peak: 135W 135W

Frequency Response: 67Hz – 21kHz 67Hz – 21kHz

Sensitivity (2.83V, 1m): 92dB 92dB

Grilles are included with the “i” version; they are optional for the “cf”version

(use Reference model 5032gr).

WARRANTY:

Reference Series speakers are warranted against defects.

The duration of the speaker’s warranty depends on the laws in the country in which it

was purchased.Your local Infinity car audio retailer can help you determine the length

of your warranty.To register your product, please visit us at www.infinitysystems.com.

5032gr

5032i

5032cf

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

TWEETER-LEVEL

CONTROL

This speaker system is equipped with a

tweeter-level switch.The normal setting for

this switch is the “0dB” position, which pro-

vides an apparently “flat” response.Tweeter

output may be increased according to the

user’s preference, or to compensate for off-

axis placement (where the speaker does not

directly face the listening position), by set-

ting the switch to the “+3dB” position.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

dir

ectly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter

assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening posi

tion will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweeter housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

ROTATING TWEETER

The Reference 5032i/cf includes a rotating,

angled tweeter mount, which is designed

to allow the tweeter to be aimed toward

the listening position. Since the tweeter’s

output becomes directional at extremely high

frequencies, aiming the tweeter toward the

listening position will improve high-frequency

response and stereo imaging.

Before securing

the grille,

grasp the tweet

er housing around

the edge and rotate the tweeter assembly

so that the tweeter faces the listener as

directly as possible.Then the grille may be

permanently secured.

Produkspesifikasjoner

Merke:	Infinity
Kategori:	Høyttaler
Modell:	REF5032CF
Impedans:	2 Ω
Toppeffekt:	135 W
Nominell effekt:	45 W
Høyttaler type:	2-veis
Frekvensrekkevidde:	67 - 21000 Hz
Sensitivitet/følsomhet:	92 dB