James C-Omni Cube Bruksanvisning
Les nedenfor 📖 manual på norsk for James C-Omni Cube (2 sider) i kategorien Høyttaler. Denne guiden var nyttig for 18 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 9.5 brukere
Side 1/2
Marine Hardware
James Standard & James Premium
Page 1
Marine Ready Products
Key Features:
High quality fastener material :
316-SS and -GR.2 Ti CP
Passivated to further improve its natural
corrosion resistance
Fluoropolymer coating to prevent thread
galling, seizing, and enhance corrosion
resistance
Application of Tef-Gel for additional corrosion
resistance
Applications:
Marine audio
Outdoor audio
In a marine environment, speakers will be
exposed to several factors which place them at high
risk including: harsh winds, high humidity, atmospheric
salinity, and direct contact with seawater. Whether
you’re looking for an outdoor system, a sound system
for your boat, a complete distributed audio system for
your oceanside getaway or even a super-yacht, James
Loudspeaker oers the necessary hardware to
withstand harsh environmental conditions and provide
long-lasting marine speaker products.
Selecting the proper hardware material is
essential for long-term corrosion control. As our James
Standard, we provide 316 Stainless Steel fasteners
which have been widely used in marine environments.
Considered the marine grade stainless, 316 Stainless
Steel is the preferred steel for service because of its
greater resistance to corrosion than other grades of
steel. Referring to the chemical composition in Table 1,
the material incorporates about 2 to 3 percent
molybdenum, which increases corrosion resistance
particularly against pitting and crevice corrosion in
chlorides and other industrial solvents. Furthermore,
our 316-SS hardware is passivated in nitric acid after
its production to facilitate the natural formation of a
thin, transparent oxide lm that protects the stainless
steel from corrosion.
In addition, we provide optional CP-GR.2
Titanium fasteners as our James Premium.
Commercially Pure (CP) Grade 2 Titanium is used
primarily for its superior corrosion resistance. It resists
pitting, crevice, and stress corrosion cracking in
seawater, marine atmospheres, and a broad range of
acids, alkalis, and industrial chemicals. The corrosion
resistance results from a very thin (~10nm), stable,
continuous oxide layer that regenerates
instantaneously if any oxygen is present. Table 2
presents the chemical composition of CP-GR.2
titanium. Similarly to the 316-SS hardware, our CP-
GR.2 Ti hardware is passivated in citric acid after its
production to further assist its natural corrosion
resistance and extend product life.
All of our marine grade products undergo a
process which protects them against the elements
even under the harshest conditions. To further protect
our hardware from corrosive surroundings, both our
CP-GR.2 Ti and 316-SS fasteners are applied with
FluoroKote#1 coating. A proprietary fluoropolymer
coating that
provides exceptional
corrosion
resistance, a low
coecient of friction,
consistent
tensioning and
subsequent ease of
installation and
removal. A metallic
base coat, as shown
in Figure 1, is
applied first followed
by an adhesion
Produkspesifikasjoner
| Merke: | James |
| Kategori: | Høyttaler |
| Modell: | C-Omni Cube |
Trenger du hjelp?
Hvis du trenger hjelp med James C-Omni Cube still et spørsmål nedenfor, og andre brukere vil svare deg
Høyttaler James Manualer
20 Oktober 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
5 Januar 2025
Høyttaler Manualer
- Muse
- Boynq
- AudioControl
- Arcam
- Sonance
- Steelseries
- MyDJ
- GoldenEar
- ESX
- Nikkei
- Sonus Faber
- Ion
- AOC
- Irradio
- Aiwa
Nyeste Høyttaler Manualer
23 Oktober 2025
21 Oktober 2025
21 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025