Magnavox MHT913R Bruksanvisning
Les nedenfor 📖 manual på norsk for Magnavox MHT913R (1 sider) i kategorien Høyttaler. Denne guiden var nyttig for 23 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 12 brukere
Side 1/1
MODEL: MHT913R
PLEASE READ BEFORE OPERATING THIS EQUIPMENT.
OWNER'S MANUAL
Size: 142(W) x 210(H)mm (A5)
STEREO SPEAKER
with Bluetooth
®
Wireless Technology
Notes:
Make sure the Line In Connection Cable is NOT plugged in the LINE IN Jack. Otherwise, BT will
not functioning. Unplug it from the LINE IN Jack before using BT.
For saving electricity, slide the POWER ON/OFF switch to OFF position and unplug the
AC/USB Adaptor from wall outlet if you will not use the unit for an extended period of time.
When the external BT Device searched the unit, our model number “MHT913R” will appear on the
display of external BT Device.
Pairing code “0000” or “1234” may need to be entered.
2. Slide the POWER ON/OFF Switch on the right side of unit to ON
position to turn the unit to Standby Mode. The Red Standby/BT
Indicator on the front of unit will illuminate.
3. Press and hold the Button on the unit or press the Button
on the Remote Control to power on the unit from Standby Mode.
The Blue Standby/BT Indicator on the front of unit will illuminate
and blink.
Note: If unplug the Line In Connection Cable from the Line
In Jack. The unit will turn to BT mode automatically
and the color of STANDBY Indicator will turns to blue.
4. Press the VOL +/- buttons to adjust volume levels as desire.
5. Press the button on the Remote Control to mute the
sound temporary, press again to resume.
6. When no longer in use, press and hold the button on the unit or press
the button on the Remote Control to turn the unit to standby mode.
NOTE: To saving the electric power, slide the POWER ON/OFF switch to OFF position and
unplug the AC/USB Adaptor from wall outlet if long period of time will not use.
3
4
5
6
7
8
1
2
1. Standby/BT Indicators
2. Charging Indicator
3. POWER ON/OFF switch
4. button
5. VOL (Volume) + button
6. VOL (Volume) - button
7. USB port (For DC IN)
8. LINE IN jack
AC/USB Adaptor
Power source:...............................................Built-in DC 3.7V, 1000mAh (3.7WH) rechargeable
Li-ion Battery, Recharge by DC 5V, 1500mA
through Micro USB Port
Impedance of the speakers:..........................2 x 5W; 4ohm
Audio power:..................................................2 x 3W (Total 6W RMS)
BT Version:....................................................4.0
BT Operation Distance:.................................96 Feet in opera area
1 x User’s Manual
1 x Remote Control (Uses 1 x CR2025 Button Cell, included)
1 x AC/USB Adapter (Input: AC 100-240V~ 50/60Hz; 0.4A, Output: DC 5V, 1500mA)
1 x Audio Connection Cables with 3.5mm Plugs
1 x USB Connection Cable (For Charging only)
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE
Volume level of paired/connected device is in low
level
Built in battery consumed
Volume of the unit was set to minimum position
Recharge the battery as page 3
Increase the volume by press and
hold the VOL + Button on the unit
or press the VOL + Button on the
Remote Control
Rise the volume level of the
paired/connected device
Can’t power on
No sound or
sound weak
Sound distortion Volume level too high
Volume level of the connected/paired device too
high
Reduce the volume level of the
connected/paired device
Reduce the volume level by press
and hold the VOL - Button on the
unit or press the VOL - Button on
the Remote Control
1. Connect the Headphone/Earphone; AUX out; Line out jacks
from the external audio player (such like MP3 player;
Discman . . . etc) to the LINE IN jacks on the unit by the
supplied Line In Connection Cable as the figure on right :
Follow these Battery Precaution when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery
compartment. A reversed battery may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries
with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long period of
time, remove the batteries to prevent damage or injury from possible battery leakage.
1. Press and hold the Button on the unit or press the Button to power on the unit from Standby
Mode. The Blue BT Indicator on the front of unit will illuminate and blink.
2. Wait a few seconds until the unit is automatically paired to the external BT Device. (The Blue
Indicator will stop blinking).
3. Plays the music in the paired BT Device as usual.
For first time use or re-pairing the unit to a new BT Device, follow the instructions below:
1. Slide the POWER ON/OFF Switch on the right side of unit to ON position to turn the unit to Standby
Mode. The Red Standby Indicator on the front of unit will illuminate.
2. Press and hold the Button on the unit or press the Button on the Remote Control to power on
the unit from Standby Mode. The Blue BT Indicator on the front of unit will illuminate and
blink.
3. Power on the external BT Device and enter to BT searching mode. Start pairing following the on
screen instructions from the external BT Device. After paired, the Blue Indicator will stop blinking.
4. Play the music on the paired BT Device as usual.
5. During playback:
Press and release the Button on the unit or the Button on the Remote Control to pause;
press again to resume normal playback.
Press and hold the VOL (Volume) +/- Buttons on the unit or press and release the VOL (Volume)
+/- Buttons on the Remote Control to adjust volume level as desired.
Press and release the VOL (Volume) +/- Buttons on the unit or press the / Buttons on the
Remote Control repeatedly to skip tracks.
6. To shut off the unit, press and hold the Button on the unit or press the Button on the Remote
Control. The color of the Standby/BT Indicator will turns to Red.
BATTERY PRECAUTIONS
BT (BLUETOOTH):
BT PAIRING:
Normal operation after paired:
OPERATION
LOCATION OF CONTROLS
POWER SOURCE
TROUBLESHOOTING
LISTENING FROM LINE IN JACKS
Maintenance
SPECIFICATIONS
PACKAGE INCLUDES:
Battery Recharging:
The unit has a built-in Li-ion rechargeable battery, recharge it before first time use or when needed
as follows:
1. Connect the small plug from the supplied USB Connection Cable to the DC IN Jack (Micro
USB Port) on the right side of unit.
2. Connect the full size USB plug from the supplied USB Connection Cable to the USB Port on
the supplied AC/USB Adaptor.
3. Connect the AC/USB Adaptor to wall outlet having AC 100-240V~, 50/60Hz as illustrated below:
4. During charging, the Red Charging Indicator on the front of unit will illuminate. When finished
charging, it will turned off.
Your battery will last longer if you follow these simple guidelines for charging and storing.
A. Before first time use, recharge the unit approximately 4 hours until the unit is fully recharged.
B. Recharge and store the unit within the temperature range of 5°C - 35°C (40°F - 95°F).
C. Do not overcharge (longer than 24 hours). Excessive charging or running the unit until battery
is fully drained will damage the battery. Battery life will be extended if you keep the battery fully
charged.
D. Battery life naturally shortens slowly over time.
E. The rechargeable battery incorporated in this product is not user replaceable.
IMPORTANT:
NOTES:
This AC/DC Adaptor is intended to be correctly orientated in a vertical or floor mount position.
To save energy, unplug the AC/USB Adaptor from the wall outlet if you will not use it for an
extended period of time.
During charging, you can also play and listen music at the same time.
POSSIBLE CAUSE POSSIBLE SOLUTIONSYMPTOM
The external BT Device had NOT paired to the unit
The external BT device too far from the unit
Pair the external BT Device to the
unit as page 5 & 6
Place the external BT device close
to the unit
BT not functioning
4 5 7 86
Check the following before requesting service:
!
1. button
2. button
3. VOL (Volume) - button
4. VOL (Volume) + button
5. (Skip Backward) button
6. (Skip Forward) button
3
5
4
1
2
6
For fist time use, slide the insulation film from the battery door and discard it as in the figure below:
5. Do not try to recharge non-chargeable batteries, It can overheat and rupture.
(Follow battery manufacturer’s instructions.)
6. Do not dispose of battery in fire. Battery may explode or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.
8. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed,
it can cause severe internal burn in just 2 hours and can lead to death. Keep new and used batteries
away from children. If the battery compartment does not close. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate medical attention.
Approx.12 feet
NOTES:
● When there is an obstacle between the unit and the
transmitter, the transmitter may not operate.
● When direct sunlight, an incandescent lamp,
fluorescent lamp or any other strong light shines on
the REMOTE SENSOR of the unit, the remote
operation may be unstable.
Printed in China MHT913R_WC_E0FG1_B0WU
LIMITED WARRANTY
Craig Electronics warrants this product to be free from manufacturing defects in
material and workmanship under normal use for a period of 180 days from date of
purchase. If service is required, please return the product to the store where it was
purchased for exchange; or, pack the unit in the original packing material with all
accessories if applicable, a copy of your sales receipt and a Cashier’s check or Money
Order for $7 (to cover shipping and handling costs) payable to Craig Electronics Inc.
For consumers in Canada, please make sure that the cashier check or money order is
redeemable through a U.S. bank. Ship your product freight pre-paid. our unit will be Y
repaired, replaced or if the unit can not be repaired or replaced, a refund will be
forwarded to you within four weeks of receipt of your unit. Please ship your unit to:
Craig Electronics Inc.
1160 NW 163 Drive
Miami, Fl 33169
This warranty is void if the product has been: a) Used in a commercial application or
rental. b) Damaged through misuse, negligence, or abuse. c) Modified or repaired by
anyone other than an authorized Craig service center. d) Damaged because it is
improperly connected to any other equipment.
Note: This warranty does not cover: a) Ordinary adjustments as outlined in the Owner’s
Manual which can be performed by the customer. b) Damage to equipment not properly
connected to the product. c) Any cost incurred in shipping the product for repair. d)
Damage to the product not used in the USA.
This warranty is not transferable and only applies to the original purchase. Any implied
warranties, including the warranty of merchantabilit , are limited in duration to the period y
of this expressed warranty and no warranty whether expressed or implied shall apply to
the product thereafter.
Under no circumstance shall Craig be liable for any loss or consequential damage arising
out of the use of this product. This warranty gives specific legal rights. However, you may
have other rights which may vary from state to state. Some states do not allow limitations
on implied warranties or exclusion of consequential damage. Therefore, these
restrictions may not apply to you.
This product has been manufactured by and is sold under the responsibility of Craig
Electronics Inc, and Craig Electronics Inc is the warrantor in relation to this product.
MAGNAVOX and SMAR . VERT Y SMAR are registered trademarks of Koninklijke Philips T
N.V. and are used under license from Koninklijke Philips N. .V
To Obtain Service on your Product
email:service@craigelectronics.com
Produkspesifikasjoner
| Merke: | Magnavox |
| Kategori: | Høyttaler |
| Modell: | MHT913R |
Trenger du hjelp?
Hvis du trenger hjelp med Magnavox MHT913R still et spørsmål nedenfor, og andre brukere vil svare deg
Høyttaler Magnavox Manualer
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
Høyttaler Manualer
- Worx
- DAP Audio
- Yamazen
- Alphatronics
- Rebeltec
- Audioengine
- DS18
- Ibiza Sound
- Alpine
- MyDJ
- Adam Hall
- NEAR
- Prixton
- Definitive Technology
- Klark Teknik
Nyeste Høyttaler Manualer
23 Oktober 2025
21 Oktober 2025
21 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025