MB Quart Discus DK2-169 Bruksanvisning
Les nedenfor 📖 manual på norsk for MB Quart Discus DK2-169 (3 sider) i kategorien Høyttaler. Denne guiden var nyttig for 21 personer og ble vurdert med 3.8 stjerner i gjennomsnitt av 11 brukere
Side 1/3
Quick Start
Installation Guide
MB Quart products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
MBQ Discus spk QSG 01 - rev1
Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
If there is not a suitable
factory location for woofer
or tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
Factory location
behind door panel
Custom location
A
B
Component installation
DK2-108DK2-108
DK2-110DK2-110
DK2-113DK2-113
DK2-116DK2-116
DK2-146DK2-146
DK2-168DK2-168
DK2-169DK2-169
DS2-216DS2-216
There are two primary
ways the tweeter can be
mounted. Surface and Flush
mounting. The ush mount
conguration is shown here.
The crossover is necessary for the proper operation of
the component speaker system. Secure the crossover
to a surface that is free of interference from window
mechanisms and excessive moisture.
Tweeter mounting
Crossover wiring
C
D
DK2-116SDK2-116S
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper
installation and use must be returned to the original authorized Maxxsonics, LLC. retailer from
where it was purchased. A photocopy of the original receipt must accompany the product being
returned. The costs associated with removal, re-installation and freight are not the responsibility of
Maxxsonics, LLC. This warranty is limited to defective parts and specically excludes any incidental
or consequential damages connected therewith. To view the full warranty, please visit the website.
Quick Start
Installation Guide
MB Quart products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
MBQ Discus spk QSG 01 - rev1
Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
If there is not a suitable
factory location for woofer
or tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
Factory location
behind door panel
Custom location
A
B
Component installation
DK2-108DK2-108
DK2-110DK2-110
DK2-113DK2-113
DK2-116DK2-116
DK2-146DK2-146
DK2-168DK2-168
DK2-169DK2-169
DS2-216DS2-216
There are two primary
ways the tweeter can be
mounted. Surface and Flush
mounting. The ush mount
conguration is shown here.
The crossover is necessary for the proper operation of
the component speaker system. Secure the crossover
to a surface that is free of interference from window
mechanisms and excessive moisture.
Tweeter mounting
Crossover wiring
C
D
DK2-116SDK2-116S
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper
installation and use must be returned to the original authorized Maxxsonics, LLC. retailer from
where it was purchased. A photocopy of the original receipt must accompany the product being
returned. The costs associated with removal, re-installation and freight are not the responsibility of
Maxxsonics, LLC. This warranty is limited to defective parts and specically excludes any incidental
or consequential damages connected therewith. To view the full warranty, please visit the website.
Quick Start
Installation Guide
MB Quart products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
MBQ Discus spk QSG 01 - rev1
Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
If there is not a suitable
factory location for woofer
or tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
Factory location
behind door panel
Custom location
A
B
Component installation
DK2-108DK2-108
DK2-110DK2-110
DK2-113DK2-113
DK2-116DK2-116
DK2-146DK2-146
DK2-168DK2-168
DK2-169DK2-169
DS2-216DS2-216
There are two primary
ways the tweeter can be
mounted. Surface and Flush
mounting. The ush mount
conguration is shown here.
The crossover is necessary for the proper operation of
the component speaker system. Secure the crossover
to a surface that is free of interference from window
mechanisms and excessive moisture.
Tweeter mounting
Crossover wiring
C
D
DK2-116SDK2-116S
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper
installation and use must be returned to the original authorized Maxxsonics, LLC. retailer from
where it was purchased. A photocopy of the original receipt must accompany the product being
returned. The costs associated with removal, re-installation and freight are not the responsibility of
Maxxsonics, LLC. This warranty is limited to defective parts and specically excludes any incidental
or consequential damages connected therewith. To view the full warranty, please visit the website.
Quick Start
Installation Guide
MB Quart products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
MBQ Discus spk QSG 01 - rev1
Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
If there is not a suitable
factory location for woofer
or tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
Factory location
behind door panel
Custom location
A
B
Component installation
DK2-108DK2-108
DK2-110DK2-110
DK2-113DK2-113
DK2-116DK2-116
DK2-146DK2-146
DK2-168DK2-168
DK2-169DK2-169
DS2-216DS2-216
There are two primary
ways the tweeter can be
mounted. Surface and Flush
mounting. The ush mount
conguration is shown here.
The crossover is necessary for the proper operation of
the component speaker system. Secure the crossover
to a surface that is free of interference from window
mechanisms and excessive moisture.
Tweeter mounting
Crossover wiring
C
D
DK2-116SDK2-116S
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper
installation and use must be returned to the original authorized Maxxsonics, LLC. retailer from
where it was purchased. A photocopy of the original receipt must accompany the product being
returned. The costs associated with removal, re-installation and freight are not the responsibility of
Maxxsonics, LLC. This warranty is limited to defective parts and specically excludes any incidental
or consequential damages connected therewith. To view the full warranty, please visit the website.
Quick Start
Installation Guide
MB Quart products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
MBQ Discus spk QSG 01 - rev1
Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
If there is not a suitable
factory location for woofer
or tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
Factory location
behind door panel
Custom location
A
B
Component installation
DK2-108DK2-108
DK2-110DK2-110
DK2-113DK2-113
DK2-116DK2-116
DK2-146DK2-146
DK2-168DK2-168
DK2-169DK2-169
DS2-216DS2-216
There are two primary
ways the tweeter can be
mounted. Surface and Flush
mounting. The ush mount
conguration is shown here.
The crossover is necessary for the proper operation of
the component speaker system. Secure the crossover
to a surface that is free of interference from window
mechanisms and excessive moisture.
Tweeter mounting
Crossover wiring
C
D
DK2-116SDK2-116S
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper
installation and use must be returned to the original authorized Maxxsonics, LLC. retailer from
where it was purchased. A photocopy of the original receipt must accompany the product being
returned. The costs associated with removal, re-installation and freight are not the responsibility of
Maxxsonics, LLC. This warranty is limited to defective parts and specically excludes any incidental
or consequential damages connected therewith. To view the full warranty, please visit the website.
Quick Start
Installation Guide
MB Quart products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
MBQ Discus spk QSG 01 - rev1
Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
If there is not a suitable
factory location for woofer
or tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
Factory location
behind door panel
Custom location
A
B
Component installation
DK2-108DK2-108
DK2-110DK2-110
DK2-113DK2-113
DK2-116DK2-116
DK2-146DK2-146
DK2-168DK2-168
DK2-169DK2-169
DS2-216DS2-216
There are two primary
ways the tweeter can be
mounted. Surface and Flush
mounting. The ush mount
conguration is shown here.
The crossover is necessary for the proper operation of
the component speaker system. Secure the crossover
to a surface that is free of interference from window
mechanisms and excessive moisture.
Tweeter mounting
Crossover wiring
C
D
DK2-116SDK2-116S
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper
installation and use must be returned to the original authorized Maxxsonics, LLC. retailer from
where it was purchased. A photocopy of the original receipt must accompany the product being
returned. The costs associated with removal, re-installation and freight are not the responsibility of
Maxxsonics, LLC. This warranty is limited to defective parts and specically excludes any incidental
or consequential damages connected therewith. To view the full warranty, please visit the website.
Quick Start
Installation Guide
MB Quart products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
MBQ Discus spk QSG 01 - rev1
Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
If there is not a suitable
factory location for woofer
or tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
Factory location
behind door panel
Custom location
A
B
Component installation
DK2-108DK2-108
DK2-110DK2-110
DK2-113DK2-113
DK2-116DK2-116
DK2-146DK2-146
DK2-168DK2-168
DK2-169DK2-169
DS2-216DS2-216
There are two primary
ways the tweeter can be
mounted. Surface and Flush
mounting. The ush mount
conguration is shown here.
The crossover is necessary for the proper operation of
the component speaker system. Secure the crossover
to a surface that is free of interference from window
mechanisms and excessive moisture.
Tweeter mounting
Crossover wiring
C
D
DK2-116SDK2-116S
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper
installation and use must be returned to the original authorized Maxxsonics, LLC. retailer from
where it was purchased. A photocopy of the original receipt must accompany the product being
returned. The costs associated with removal, re-installation and freight are not the responsibility of
Maxxsonics, LLC. This warranty is limited to defective parts and specically excludes any incidental
or consequential damages connected therewith. To view the full warranty, please visit the website.
Quick Start
Installation Guide
MB Quart products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
MBQ Discus spk QSG 01 - rev1
Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
If there is not a suitable
factory location for woofer
or tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
Factory location
behind door panel
Custom location
A
B
Component installation
DK2-108DK2-108
DK2-110DK2-110
DK2-113DK2-113
DK2-116DK2-116
DK2-146DK2-146
DK2-168DK2-168
DK2-169DK2-169
DS2-216DS2-216
There are two primary
ways the tweeter can be
mounted. Surface and Flush
mounting. The ush mount
conguration is shown here.
The crossover is necessary for the proper operation of
the component speaker system. Secure the crossover
to a surface that is free of interference from window
mechanisms and excessive moisture.
Tweeter mounting
Crossover wiring
C
D
DK2-116SDK2-116S
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper
installation and use must be returned to the original authorized Maxxsonics, LLC. retailer from
where it was purchased. A photocopy of the original receipt must accompany the product being
returned. The costs associated with removal, re-installation and freight are not the responsibility of
Maxxsonics, LLC. This warranty is limited to defective parts and specically excludes any incidental
or consequential damages connected therewith. To view the full warranty, please visit the website.
Component
installation
r
Crossover wiring
'
The crossover is necessary for the proper operation of
the component speaker system. Secure the crossover
to
a
surface that is free of interference from window
mechanisms and excessive moisture.
MAXXONICS"
MBQ Discus spk QSG 01
-
rev1
Quick Start
Installation Guide
-
D-108
D-110
D-113
D-146
D-168
D-169
D-116
D-6
D-116S
Produkspesifikasjoner
| Merke: | MB Quart |
| Kategori: | Høyttaler |
| Modell: | Discus DK2-169 |
Trenger du hjelp?
Hvis du trenger hjelp med MB Quart Discus DK2-169 still et spørsmål nedenfor, og andre brukere vil svare deg
Høyttaler MB Quart Manualer
19 Oktober 2025
17 Oktober 2025
17 Oktober 2025
17 Oktober 2025
17 Oktober 2025
17 Oktober 2025
17 Oktober 2025
16 Oktober 2025
16 Oktober 2025
16 Oktober 2025
Høyttaler Manualer
- Audac
- Induction Dynamics
- GPO
- Urban Revolt
- Cambridge
- Dual
- Pure Acoustics
- Louroe Electronics
- Vorago
- Belkin
- Duronic
- Biltema
- Miller & Kreisel
- Elbe
- QSC
Nyeste Høyttaler Manualer
23 Oktober 2025
21 Oktober 2025
21 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025