Miiego AXTIVE SQUARE Bruksanvisning
Miiego
Hodetelefoner
AXTIVE SQUARE
Les nedenfor 📖 manual på norsk for Miiego AXTIVE SQUARE (32 sider) i kategorien Hodetelefoner. Denne guiden var nyttig for 34 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 17.5 brukere
Side 1/32

Quick Start Guide
DK
NOR
ENG 1 - 2
3 - 4
5 - 6
SE
NL
7 - 8
9 - 10
DE 11 - 13
AXTIVE SQUARE
WIRELESS SPEAKER

ENG
1
2
3
1
This device contains a lithium accumulator.
Improper use can cause erheating and fire. ov
Power on/off
Charging port
LED indicator
SPECIFICATIONS
BT v5.2. Rechargeable 500 mAh Li-ion battery. Full charging time:
around 2-3 hours. Battery playing time: up to 7 hours per charge
(depending on volume level). Frequency range: 2402-2480GHz. Freq.
Response: 60Hz-15KHz. Charging input power: 5V DC/1A. RMS audio
output: 3W. Impedance: 4 .Ω
CARE, MAINTENANCE, SAFETY
Any modification of the product may have consequences for safety,
warranty and proper functioning. Keep out of reach for children and
animals. Product storage and working temperature: from -5 Celsius
degrees to +40. Do not expose the product to direct sunlight, heat or
naked flames as it may cause damage or explosion. Do not use the
product if a part is damaged or defective. Replace a damaged or
defective device immediately. Disconnect the product from the electrical
outlet and other equipment if problems occur. Do not charge when the
product is wet. Do not leave a battery on prolonged charge when not in
use. Do not dismantle, open or shred batteries. Do not drop the product
and avoid bumping. This product may only be serviced by a qualified
technician for maintenance to reduce the risk of electric shock etc.
1
2
3

ENG
2
Pairing your AXTIVE SQUARE Wireless speaker
1: Make sure the speaker is charged and turned OFF.
2: Press the ON/OFF switch (1) to turn the speaker on.
3: Activate BT on your phone or other device and search for new device
and select:
AXTIVE SQUARE.
The speaker will remember your phone/device and automatically
reconnect the next time you turn it on.
An unpaired speaker will automatically turn off after 10 minutes.
Charging the AXTIVE SQUARE speaker
Use a 5V/1A USB adapter for charging.
During charging the red light is on. When fully charged the red light is
off.
Full charging time is around 2-3 hours with 1A.
Next time charging
When you hear a warning tone every 180 seconds, the battery status is
low and needs charging.
Pairing and connecting 2 x AXTIVE SQUARE speakers with TWS
TWS only works when connecting two together.AXTIVE SQUAREs
1: Turn on both speakers (BT mode). Make sure they are unconnected.
2: They will then wirelessly connect together automatically by TWS.
3: One speaker emits a tone and the LED indicator light (3) will flash 2
times every 5 seconds. This is then the slave speaker.
4: Activate BT on your phone/device and connect with the master
speaker.
Produkspesifikasjoner
Merke: | Miiego |
Kategori: | Hodetelefoner |
Modell: | AXTIVE SQUARE |
Trenger du hjelp?
Hvis du trenger hjelp med Miiego AXTIVE SQUARE still et spørsmål nedenfor, og andre brukere vil svare deg
Hodetelefoner Miiego Manualer
5 Januar 2025
19 Desember 2024
19 Desember 2024
19 Desember 2024
19 Desember 2024
19 Desember 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Hodetelefoner Manualer
- Motorola
- Focal
- Audio-Technica
- Muse
- CGV
- Celly
- Akg
- Cleer
- ModeCom
- MEE Audio
- ADATA
- S.M.S.L
- Roland
- Teufel
- SBS
Nyeste Hodetelefoner Manualer
10 April 2025
4 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025