Pulsar W309 Bruksanvisning
Pulsar
armbåndsurer
W309
Les nedenfor 📖 manual på norsk for Pulsar W309 (6 sider) i kategorien armbåndsurer. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/6
E – D02
Printed in Japan6-92
(E.)
INSTRUCTIONS AND GUARANTEE
FOR OCEANIA
Series GH & TW (Cal. W309, W329)
DIGITAL TYPE
P
PULSAR LC DIGITAL QUARTZ
Cal. W309, W329
CHARACTERISTICS
Each depression of button “A” changes displays as shown below.
A
DISPLAY AND BUTTON OPERATION
Time/calendar display
[Cal. W309] [Cal. W329]
Alarm display
A
1. Time/calendar display: Hour (12- or 24-hour indication),
minute, second, date, month, day of the week, and “A”(AM)/
“P”(PM) mark. Calendar adjusts automatically for odd and
even months except February of leap years.
2. Alarm display: Hour, minute, “A”(AM)/“P”(PM) mark, and
alarm and time signal marks.
3. Stopwatch display: Minute, second, 1/100 second and split
mark. The stopwatch measures in 1/100 seconds up to 60
minutes.
4. 12- or 24-hour display: Changeover between 12- and 24-hour
indications is possible. The alarm display is interlocked with
the time/calendar display.
5. Illuminating light: Illuminates the display in the dark when
button “D” is depressed.
Time/calendar setting
A
A
B
C
B
D
A
C
Stopwatch display
D
A
HOW TO SET THE ALARM
B
C
A
Hour
1. Selection of the digits to be adjusted
is made alternately between the hour
and the minute digits by each depression
of button “B”.
2. One digit (flashing) is advanced by
each depression of button “C”. The
digits are advanced quickly by keeping
button “C” depressed. (Be sure to
check that “A”(AM)/“P”(PM) is correctly
set.)
3. After all adjustments are completed,
depress button “A” to return to the
time/calendar display.
Depress button “A” to show the alarm display, and then depress
button “B” to activate the setting function. The hour digits and
“A”(AM)/“P”(PM) mark start flashing.
* When the time/calendar function is displayed in the 24-hour
indication, the alarm function will also be displayed in the 24-
hour indication.
How to engage and disengage the alarm and hourly time signal
Time signal mark
Alarm mark
* The alarm rings at the designated time for 20 seconds and
stops. However, it can be stopped manually by depressing any
one of buttons “A”, “B” and “C”.
** The alarm sound can be tested by depressing buttons “B” and
“C” at the same time in the time/calendar display.
Alarm Time signal
Engaged
Disengaged
Engaged Disengaged
Disengaged Engaged
In the time/calendar display depress
buttons “B” and “C” at the same time,
and the engagement and disengagement
of the alarm and the time signal rotate
in the following order:
A/P mark
Minute
B
C
Produkspesifikasjoner
| Merke: | Pulsar |
| Kategori: | armbåndsurer |
| Modell: | W309 |
Trenger du hjelp?
Hvis du trenger hjelp med Pulsar W309 still et spørsmål nedenfor, og andre brukere vil svare deg
armbåndsurer Pulsar Manualer
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
18 September 2025
18 September 2025
armbåndsurer Manualer
- armbåndsurer Epson
- armbåndsurer Omega
- armbåndsurer Braun
- armbåndsurer Breitling
- armbåndsurer Suunto
- armbåndsurer Lotus
- armbåndsurer Sekonda
- armbåndsurer PAUL HEWITT
Nyeste armbåndsurer Manualer
14 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025