Pulsar W670 Bruksanvisning
Pulsar
armbåndsurer
W670
Les nedenfor 📖 manual på norsk for Pulsar W670 (2 sider) i kategorien armbåndsurer. Denne guiden var nyttig for 4 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 2.5 brukere
Side 1/2
INSTRUCTIONS
DIGITAL TYPE
Series PVH (Cal. W670)
FEATURES
● Time/calendar
● Stopwatch
● Countdown timer
with preset and adjustable timer functions
● Daily alarm
● Auto illumination function
● Illuminating light
AUTO ILLUMINATION FUNCTION
● The display is usually turned off. By pressing a button to operate the watch, the light is
turned on to show the display for 2 seconds.
● The display will be turned off 2 seconds after a button is pressed.
* To check the data on the display, press button E.
(See “ILLUMINATING LIGHT” below)
● While the stopwatch or timer is counting, the display is illuminated every minute to signal
the lapse of time: For the first 19 minutes in the stopwatch function and for the last 19
minutes in the timer function.
ILLUMINATING LIGHT
E
Turn on the illuminating light.
The display panel is illuminated
for 3 seconds.
MODE CHANGE
With each press,
the mode changes in order.
A
Mode
mark
TIME/CALENDAR
mode
STOPWATCH
mode
▲
▲
○○○○○○○○○○○○
○○
○○
▲
TIMER mode
ALARM mode
○○○○○○○○○○○○○○
▲
● When the confirmation sound is turned on, a beep sounds with each press of button A to
change over the mode. It sounds in a different tone when the TIME/CALENDAR mode
appears, so that you can easily know the mode shown.
TIME/CALENDAR MODE
TIME/CALENDAR SETTING
C
Day
DateMonth
Press for 2 to 3 seconds.
B
▲
C
Select the digits to be adjusted.
▲
D
B
Set the flashing digits.
▲
▲
Return to TIME/CALENDAR mode.
D
B
“A” (AM)/
“P” (PM) mark
Selection of the digits
Seconds ➾ Minutes ➾ Hour ➾ Date
➾
➾
12-/24-hour indication Year Month
➾
➾
● The calendar automatically adjusts for odd and even months including February of
leap years.
● In second setting, when the seconds count any number from “30” to “59” and button
D is pressed, one minute is added and the seconds are reset to “00”.
● The flashing digits except the seconds and 12-/24-hour indication move quickly if
button D is kept pressed.
●
Once the year, month and date have been set, the day of the week is automatically set.
● If the watch is left untouched with the digits flashing, it will automatically return to the
TIME/CALENDAR mode in 2 to 3 minutes.
● Note on unusual display:
While setting the time/calendar, all the segments of the display will light up if both
buttons C and D are pressed at the same time. This is not a malfunction. Press any
one of the buttons to return to the TIME/CALENDAR mode, and then set the time/
calendar again.
STOPWATCH MODE
● The stopwatch measures up to 10 hours in 1/100 second increments.
C
Start / Stop / Restart
D
Current time
Time measured
Reset /
Measure lap time
B
Lap time measurement
C
START
D
LAP
D
LAP
D
RESET
C
STOP
▲
▲
▲
▲
Lap No.
Lap time
MEMORY RECALL FUNCTION
B
D
▲
● The stored data can be recalled either during or after the measurement.
Press to activate the memory recall
function.
**
With each press, stored data are
recalled from the oldest to the newest.
B
▲
Return to STOPWATCH mode.
**In memory recall after measurement, the
oldest measurement in memory is displayed.
In memory recall during measurement, the
newest measurement in memory is displayed.
D
B
● Lap time measured and lap number remain displayed for 10 seconds, and then, the
current time appears in the upper row of the display.
● The first 8 lap times are automatically stored in memory.
● Even if the digits are reset to “00” in the stopwatch measurement, stored data is not
erased and can be recalled unless a new measurement is started.
● When the button operation confirmation sound is turned on, a beep sounds every
minute to signal the lapse of time.
● Even if the STOPWATCH mode is changed to another while the measurement is in
progress, it continues counting properly and the flashing STOPWATCH mode mark
indicates that the stopwatch is in use. After the stopwatch is used, however, be sure
to reset it as the battery energy is consumed enormously to shorten the battery life.
● The display will be turned off 2 seconds after a button is pressed. To check the data
on the display, press button E.
12-98 Printed in Japan
NPED22
Produkspesifikasjoner
| Merke: | Pulsar |
| Kategori: | armbåndsurer |
| Modell: | W670 |
Trenger du hjelp?
Hvis du trenger hjelp med Pulsar W670 still et spørsmål nedenfor, og andre brukere vil svare deg
armbåndsurer Pulsar Manualer
21 September 2025
20 September 2025
20 September 2025
20 September 2025
20 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
armbåndsurer Manualer
Nyeste armbåndsurer Manualer
20 Oktober 2025
20 Oktober 2025
14 Oktober 2025
13 Oktober 2025
6 Oktober 2025
29 September 2025
29 September 2025
29 September 2025
29 September 2025
29 September 2025