Sub-Zero BI-48SD/O Bruksanvisning

Sub-Zero Kjøleskap BI-48SD/O

Les nedenfor 📖 manual på norsk for Sub-Zero BI-48SD/O (56 sider) i kategorien Kjøleskap. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/56
Built-In Refrigeration Installation Guide
BUILT-IN REFRIGERATION
Contents
3 Built-In Refrigeration
4 Opening Dimensions
8 Dual Installation
8 Electrical
9 Plumbing
9 Preparation
10 Anti-Tip Bracket
12 Placement
12 Water Line
13 Custom Panels
16 Alignment
17 Completion
Features and specications are subject to change at any
time without notice. Visit subzero.com/specs for the most
up-to-date information.
Important Note
To ensure this product is installed and operated as safely
and efciently as possible, take note of the following types
of highlighted information throughout this guide:
IMPORTANT NOTE highlights information that is especially
important.
CAUTION indicates a situation where minor injury or product
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
IMPORTANT NOTE: Throughout this guide, dimensions in
parentheses are millimeters unless otherwise specied.
IMPORTANT NOTE: Save these instructions for the local
electrical inspector.
subzero.com
|
3
Product Information
Important product information including the model and
serial number are listed on the product rating plate. The
rating plate is located at the top frame of the unit, inside the
door. Refer to the illustration below.
If service is necessary, contact Sub-Zero factory certied
service with the model and serial number. For the name
of the nearest Sub-Zero factory certied service or for
questions regarding the installation, visit the contact & sup-
port section of our website, subzero.com or call Sub-Zero
customer care at 800-222-7820.
BUILT-IN REFRIGERATION
Tools and Materials
Screwdrivers—standard and Phillips.
Power drill.
Drill bits (masonry bits required for concrete installation).
Torx drives—T-10, 15 and 20.
Standard Allen wrench set.
Standard socket and wrench set.
2' and 4' levels.
Tubing cutter.
3' of
1
/4" OD copper, braided stainless steel or PEX
tubing.
Saddle valve.
Material to protect home, ooring and cabinetry during
installation.
Rating plate location.
RATING
PLATE

Produkspesifikasjoner

Merke: Sub-Zero
Kategori: Kjøleskap
Modell: BI-48SD/O

Trenger du hjelp?

Hvis du trenger hjelp med Sub-Zero BI-48SD/O still et spørsmål nedenfor, og andre brukere vil svare deg




Kjøleskap Sub-Zero Manualer

Kjøleskap Manualer

Nyeste Kjøleskap Manualer