Tornado TAFT-1000-GS Bruksanvisning

Tornado Frityrkoker TAFT-1000-GS

Les nedenfor 📖 manual på norsk for Tornado TAFT-1000-GS (22 sider) i kategorien Frityrkoker. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/22
English 1
Air
Fryer
Milk
Frother
TAFT-1000-GS
OWNER
MANUAL
English 2
Important Safeguards
Know Your Air Fryer
When using electrical appliances, basic safety
precautions should always be followed, including the
following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electric shock do not immerse cord,
plugs, or appliance in water or other liquid.
4. Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and
before cleaning the appliance.
5. Do not operate any appliance with a damaged cord
or plug or after the appliance malfunctions, or has been
damaged in any manner. Bring it to a qualied technician
for examination, repair or electrical or mechanical
adjustment.
6. If the supply cord is damaged it must be replaced by the
manufacturer or a authorized service agent or a qualied
technician in order to avoid a hazard.
7. The use of accessory attachments not recommended by
the appliance manufacturer may cause injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or
touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or
in a heated oven.
11. Extreme caution must be used when moving an
appliance containing hot oil or other hot liquids.
12. To disconnect, turn off the Power button and then
remove plug from wall outlet.
13. Do not use appliance for other than intended use.
14. Always make sure the inner pot is fully closed while Air
Fryer is in operation. Air Fryer will not operate unless the
inner pot is fully closed.
15. After the hot air frying is completed, the inner pot and
the cooked foods are hot. Be careful when handling the
hot inner pot.
16. The inner pot can not be used for storing things,
especially papers, cardboard or plastic.
17. The appliances are not intended to be operated by
means of an external timer or separate remote-control
system.
18. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
HOUSEHOLD USE ONLY
CONTROL PANEL
OPERATION INSTRUCTION FOR CONTROL PANEL
1. After plug in, one long beep can be heard, all the
indicators on the control panel illuminate for 1 second and
the appliance enters into the power off mode. At that time,
the indicator of Power button illuminates solidly while other
buttons and indicators go
into the sleep mode.
2. Shortly press the Power button ” , cavity1 “ ” and
cavity2 “
buttons on the control panel are activated.
Then Shortly press the cavity1 button
” or cavity2 button “ ”At that time, the default
temperature is 200 and the default time is 15
minutes.
3. Shortly press “ ” to make switching among the menus.
The indicator of the selected menu ashes while the
indicators of the other menus illuminate solidly.
4. Press cavity1 “ ” or cavity2 “ ”Shortly press the
TIME/TEMP button “ ” to make switching between the
temperature and time, and then adjust the
temperature or time by or ”. Hold and press or
to adjust
the temperature or time quickly, at that time, you can
still make switching among the menus.
5. After setting the temperature, time and menu, shortly
press the START/STOP button “ ”, the appliance starts to
work and the heating indicator illuminates.
6. During working, shortly press the START/STOP button
“ ”, the appliance pauses working . Press the the START/
STOP button “ ” again and the appliance continues
working.
7. After the working is completed , the appliance exits
English 3
from the working mode, ve beep is heard and the heating
indicator extinguishes, the display shows “000” and “000”
ashes. When the display extinguishes completely (only
the indicator of Power button illuminates), the appliance
enters into the power off mode.
8. For the Preheat function, the default temperature is
200 and the default time is 3 minutes. The time and
temperature can not be adjusted under the preheat mode.
In the
before selecting the menu or pause mode, shortly
press the PREHEAT button
to select the function(press it again to cancel the
selection). Shortly press the
START/STOP button enter the preheating mode,.
9. For the keep-warm function, the default temperature
is 80 and the default time is 60 minutes. The time and
temperature can not be adjusted under the preheat mode.
In the before selecting the menu or pause mode, shortly
press the KEEP WARM button
to select the function(press it again to cancel the
selection). After the heating work is completed, the
appliance enter the keep-warm mode, and return to the
power off mode after the working is completed.
10. After the appliance is powered on, you can remove
the inner pot at any time, at that time, the appliance stops
working, the display illuminates solidly indicating the inner
pot is removed, at that time, the appliance can not be
operated. And the appliance will continue working after the
inner pot is placed correctly again.
11. FRIES When 1/2 and 1/6 of the cooking time is left,
FISH,STEAK,VEGETABLE, CHICKEN WING,CHICKEN
LEG,BACON,SHRIMP,SAUSAGE,When 1/3 of the
cooking
time is left,the Shake indicator will flash and the
buzzer will beep for 30 seconds (one beep can be
heard every 3 seconds) to remind the user to perform
the “Shake” operation. And the “Shake” operation will
be canceled after either of the following operations is
performed.
(1) The user removes the inner pot and perform the
“Shake” operation within 30 seconds, and then place the
inner pot in the main body again.
(2) There is not any operation within 30 seconds.
Either of the above conditions is considered to be
the completion of the “Shake” operation. After the
“Shake” operation is completed, the buzzer will stop
beeping, the Shake indicator will extinguish and the
appliance will continue working.
12. For the match cook function,when you have set the
menu for cavity1 or
cavity2 ,then shortly press the NATCH COOK“
button ,the set cavity data is copied another
cavity,shortly press the START/STOP ”button,the
appliance starts to work and return to the power off
mode after the working is completed.
13. For the smart nish function,when you have set
the menu for cavity1and cavity2 ,then shortly press the
SMART FINISH“ ” button ,the set cavity data is
copied another cavity,shortly press the START/STOP “
”button,the appliance starts to work and return to the
power off mode after the working is completed.using this
function,different foods can cooked at the same time
1. Your Air Fryer is supplied with a shelf placed in the inner
pot. Grasp the handle to remove the inner pot from the
main body and then place it on a at and clean working
area.Remove all packing material and labels from the
inside and outside of the Air Fryer.
2. Check and ensure that there is no packing material
under and around the inner pot.
3. Wash shelf and inner pot in hot, soapy water.
4. DO NOT IMMERSE THE AIR FRYER BODY IN WATER.
Wipe Air Fryer body with
a damp cloth. Dry all parts thoroughly.
NOTE: During first use, the Air Fryer may emit a slight
odor. This is normal.
WARNING: This appliance can not be used to boil
water.
PRODUCT OPERATION GUIDELINES
1. Place the Air Fryer on a at and heat-resistant working
area which is close to an electrical outlet.
2. Firmly grasp the handle to remove the inner pot from the
main body and then place it on a at and clean surface.
3. Place the food on the shelf and please do not overll.
4. Push the inner pot into the main body and make sure
that the inner pot is placed correctly.
5. Connect the appliance with power source.
6. The adjustable temperature range between 60-200
and the adjustable time ranges between 1 minute and 60
minutes.
7. If the Air Fryer is at the cold state, select the Preheat
function (no need to load food), the heating indicator
illuminates and the Air Fryer starts to heat. The cooking
effect will be better after the appliance is preheated.
8. Follow the operation in the section of “OPERATION
INSTRUCTION FOR CONTROL PANEL” to select the
proper time and temperature according to the food to be
cooked. And then turn on the appliance.
9. When the inner pot is removed, the heating element will
stop working and the display will indicate that the inner pot
has been removed. After the inner pot is placed correctly,
the appliance will continue heating.
10. Flip the food over to check the browning and doneness
of the food. If need to continue cooking, adjust the
temperature and time until the food is cooked completely.
11. After the cooking is completed, remove the inner pot
from the body and place it on a at and heat-resistant
surface. Put the cooked food in a proper container.
12. The cooking can be continued if necessary. Unplug the
appliance when not in use. NOTE: The Air Fryer will not
heat if the START/STOP button is not activated. Unless
the inner pot is installed correctly, the Air Fryer will not heat
and the display will indicate that the inner pot has been
removed. After the cooking is completed, please press the
Power button to turn off the Air Fryer.
WARNING: Be careful when flipping over the food in
the inner pot. To avoid personal injury or property
damage, do not flip over the food by shaking the
whole machine.
WARNING: Be extra careful when removing and
placing the inner pot to avoid being scalded by hot
steam.
Before Using For The First Time

Produkspesifikasjoner

Merke: Tornado
Kategori: Frityrkoker
Modell: TAFT-1000-GS

Trenger du hjelp?

Hvis du trenger hjelp med Tornado TAFT-1000-GS still et spørsmål nedenfor, og andre brukere vil svare deg




Frityrkoker Tornado Manualer

Frityrkoker Manualer

Nyeste Frityrkoker Manualer