Tripp Lite SmartPro SMART500RT1U Bruksanvisning

Les nedenfor 📖 manual på norsk for Tripp Lite SmartPro SMART500RT1U (36 sider) i kategorien uforstyrret strømtilførsel (UPS). Denne guiden var nyttig for 9 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 5 brukere

Side 1/36
1
Owner’s Manual
Warranty
Registration
Register online today for a
chance to win a FREE Tripp Lite
product! www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support
Important Safety Instructions 2
Mounting 4
Quick Installation 5
Optional Installation 6
Basic Operation 7
Storage and Service 10
Battery Replacement 11
Warranty Registration 12
Español 13
Français 25
SmartPro
®
1U Rackmount
Intelligent, Line-Interactive UPS Systems
120V Output • 500VA – 1000VA
SMART500RT1U
Series: AG-0097
SMART750RM1U
Series: AGSM8269
SMART1000RM1U
Series: AGSM5060
Not suitable for mobile applications.
Copyright © 2014 Tripp Lite. All rights reserved. SmartPro
®
is a registered trademark of Tripp Lite.
13-12-130-93328A.indb 1 1/6/2014 2:59:12 PM
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation,
operation and storage of this product. Failure to heed these warnings may affect the warranty.
UPS Location Warnings
Use caution when lifting the UPS. Because of the considerable weight of all rackmount UPS
systems, at least two people should assist in lifting and installing them.
Install the UPS indoors, away from excess moisture or heat, dust or direct sunlight.
For best performance, the ambient temperature near the UPS should be between 0° C and 40° C
(between 32° F and 104° F).
Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its vents
or fan openings.
When mounting the UPS system in a tower orientation, make sure the LED Screen panel is at the
top of the UPS, not at the bottom.
Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner
will seriously inhibit the unit’s internal cooling, eventually causing product damage not covered
under warranty.
UPS Connection Warnings
The UPS contains its own energy source (battery). The output terminals may be live even when
the UPS is not connected to an AC supply.
Connect the UPS to a properly grounded AC power outlet. Do not modify the UPS’s plug in a way
that would eliminate the UPS’s connection to ground. Do not use adapters that eliminate the
UPS’s connection to ground.
Do not plug the UPS into itself; this will damage the UPS and void your warranty.
If you are connecting the UPS to a motor-powered AC generator, the generator must provide
filtered, frequency-regulated computer-grade output. Connecting the UPS to a generator will void
its Ultimate Lifetime Insurance.
Equipment Connection Warnings
Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended. Do not use this equipment in the presence of a flammable
anesthetic mixture with air, oxygen or nitrous oxide.
Do not connect surge suppressors or extension cords to the output of the UPS. This might
damage the UPS and may affect the surge suppressor and UPS warranties.
13-12-130-93328A.indb 2 1/6/2014 2:59:12 PM

Produkspesifikasjoner

Merke: Tripp Lite
Kategori: uforstyrret strømtilførsel (UPS)
Modell: SmartPro SMART500RT1U

Trenger du hjelp?

Hvis du trenger hjelp med Tripp Lite SmartPro SMART500RT1U still et spørsmål nedenfor, og andre brukere vil svare deg