Uniden G101 Bruksanvisning

Les nedenfor 📖 manual på norsk for Uniden G101 (4 sider) i kategorien Sikkerhetskamera. Denne guiden var nyttig for 2 personer og ble vurdert med 3.8 stjerner i gjennomsnitt av 1.5 brukere

Side 1/4
1
This unit, if not installed properly, maybe defective.
This camera is powered by AA batteries only. Do not use any power
adaptor.
When installing batteries (not supplied), please ensure that they are
inserted with proper orientation.
Do not expose the insides of the unit to rain or moisture.
If any items are missing or damaged, contact your place of purchase
immediately. Never use damaged products!
Need help? Get answers at our website:
www.uniden.com.au for Australian model
www.uniden.co.nz for New Zealand model.
QUICK START GUIDE
#Once the batteries have been installed, the LEDs will blink at an
interval of 2 seconds.
SAFETY INSTRUCTIONS
Camera Base
LED Light
Camera Lens
G101 - DOME IMITATION CAMERA
2
To install the batteries (not supplied), open the casing (found at the base)
and then insert three AA batteries with proper orientation.
1. Use the included guide card to mark the place to install and screw the
camera.
2. Drill necessary holes in the marked spots.
3. Place the included anchors into the drilled spots.
4. Use the anchors to hold the screws, and ensure that the screws stay out a
bit to hold the camera.
Place the camera on the selected spot
to match the mounting holes with
the screws and turn it to the right
to fix it.
SPECIFICATIONS
INSTALLATION
Material ABS
Colour White
Camera Base ABS
Camera Lens Plastic
Power Source 3 x 1.5V AA batteries
On/Off Method Installation/Removal of batteries
Accessories Mounting Hardware, 2 Screws
Unit N.W 130g

Produkspesifikasjoner

Merke: Uniden
Kategori: Sikkerhetskamera
Modell: G101

Trenger du hjelp?

Hvis du trenger hjelp med Uniden G101 still et spørsmål nedenfor, og andre brukere vil svare deg




Sikkerhetskamera Uniden Manualer

Sikkerhetskamera Manualer

Nyeste Sikkerhetskamera Manualer