Vango Diablo 600 XL Bruksanvisning
Les nedenfor 📖 manual på norsk for Vango Diablo 600 XL (1 sider) i kategorien Full. Denne guiden var nyttig for 4 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 2.5 brukere
Side 1/1
IF YOU HAVE ANY PROBLEMS PLEASE CONTACT YOUR LOCAL RETAILER or
AMG Group Ltd., Kelburn Business Park, Port Glasgow, Scotland. PA14 6TD.
UK Consumer Hotline: 0844 811 0535 E-Mail: info@vango.co.uk
Calls to our Customer Hotline cost 5p per minute. Calls from mobile phones, cable networks or public payphones will generally cost more.
FLYSHEET FIRST PITCHING
Assemble poles and lay them parallel on the ground.
Open out flysheet and position in required direction.
Ensure the flysheet doors are mostly closed with only a
small gap along the bottom when pitching the tent.
Insert front 3 poles into pole sleeves, the poles are
colour coded to match the coloured tab on the pole
sleeve.
On both sides of the tent, loosen the tension straps and
locate the ends of each pole into the corresponding
Ring & Pin.
Tension the pole end straps and attach the pole clips
Lay pole arches on the ground. The back of the tent
should down with the front of the tent face up. be
Peg out adjustable anchor straps at both corners of
front end of tent using the pegs supplied.
With one person at each side of the tent gather all the
poles together and lift into the upright position
“ ”Walk the tent back, away from pegged points, until
the central tunnel takes shape. Insert pegs into the two
Ring & Pins at the back of the tent at either side of the
back door.
Ensure the tent is in a straight line. The groundsheet
should be flat and wrinkle free.
Insert the medium and short poles into the pods.
Attach ring and pin, lift up, attach clips and peg out
the back of the pods.
Insert the brow pole above the rear door (600XL only).
Secure the tent using the pin pegs through the Ring &
Pin system (see fig 2).
Peg out ALL guy lines, ensuring that they are in line
with the pole or seam they are attached to.
INNER ATTACHMENT
Suspend the inners by attaching toggles on
the inner tent through rings on the inside of
the flysheet. Do the rear first and work
towards the front of the tent.
Once fully attached, the inners can be left
in when pitching or striking the tent.
However, it is advisable to remove the
inners when striking the tent when wet.
TENSION BAND SYSTEM
Remove Tension Band System from pockets
and attach into the corresponding clips at
the apex of the pole. Adjust the straps until
they are taut.
DO NOT OVER TENSION. Excess tension will
alter the shape of the tent.
Tension bands are designed to stabilise the
tunnel structure of the tent. The bands are
not required to be used in calm weather.
Figure 1.
Figure 2.
Tent Pitching Instructions Diablo 600XL & 900XL –
Ring & Pin System
1. Locate one end of each pole onto the corresponding metal pin. The metal pin inserts into the hollow
metal ferrule on the end of each pole. (See Figure 1). Push the pole into a curve from the opposite
side, one at a time, and locate all pole ends onto the metal pins.
2. Peg the corners of the tent through the metal rings using pin-pegs. It is important to drive the peg
into the ground at a 45 degree angle to obtain the best grip. (See Figure 2).
Produkspesifikasjoner
| Merke: | Vango |
| Kategori: | Full |
| Modell: | Diablo 600 XL |
Trenger du hjelp?
Hvis du trenger hjelp med Vango Diablo 600 XL still et spørsmål nedenfor, og andre brukere vil svare deg
Full Vango Manualer
28 September 2025
27 September 2025
27 September 2025
26 September 2025
26 September 2025
26 September 2025
26 September 2025
26 September 2025
26 September 2025
26 September 2025
Full Manualer
- Perel
- Sunny
- Outdoor Connection
- De Waard
- Mx Onda
- Mountain Hardwear
- Outwell
- Skandika
- Gerjak
- Coleman
- Brunner
- Yamazen
- Gazebo Penguin
- LECO
- Step2
Nyeste Full Manualer
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025