AEG EPPCS2 Bruksanvisning
AEG
Strykebrett
EPPCS2
Les nedenfor 📖 manual på norsk for AEG EPPCS2 (10 sider) i kategorien Strykebrett. Denne guiden var nyttig for 14 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 7.5 brukere
Side 1/10
EN
Fill the clean water into the inner tank.
Detergent optional.
Place the mop nozzle according to the sign on the top plate.
Hold the vacuum cleaner vertically and turn the Power on.
Gently press down the PRESS button to wash the pads. Hold
the cleaner in an upright position (min 5 sec).
Keep the Power on, lift up the vacuum cleaner and release the
PRESS button to dry the pads with the radial scraper.
Empty the dirty water tank through the drainage hole.
When washing the pads on
your cleaning station,
press the cleaner down
only gently and keep it in
an upright position. If you
use too much force, the
cleaner may switch off. This
is a safety feature. If this
happens, wait around 10
seconds, switch the cleaner
on again and press it down
with less force than before.
Produkspesifikasjoner
| Merke: | AEG |
| Kategori: | Strykebrett |
| Modell: | EPPCS2 |
Trenger du hjelp?
Hvis du trenger hjelp med AEG EPPCS2 still et spørsmål nedenfor, og andre brukere vil svare deg
Strykebrett AEG Manualer
10 August 2025
8 August 2025
Strykebrett Manualer
Nyeste Strykebrett Manualer
29 September 2025
13 September 2025
4 September 2025
27 August 2025
20 August 2025
14 August 2025
14 August 2025
14 August 2025
14 August 2025
18 Mars 2025