Angler LEDSB-1818 Bruksanvisning
Les nedenfor 📖 manual på norsk for Angler LEDSB-1818 (8 sider) i kategorien blitz. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/8
INSTRUCTIONS
Collapsible LED Softbox
LEDSB-1818
For 1 × 1 LED Lights
2
Overview
Corner straps
Securing straps
Adjustable corners
Diuser
Recessed touch-connect strip
Carry bag
Notches
3
Attaching the Softbox
Preparing the Light Fixture
If the fixture has height adjustment knobs, raise the fixture’s height
so it sits above the bottom of the yoke.
Some 1 × 1 fixtures have two sets of side knobs for tilt and height
adjustment. Adjust the height so the tilt knobs are in the middle of
the fixture. This will make it easier to fit the softbox onto it.
Tip: Tilting the fixture upward in its yoke will make it easier to fit the
softbox onto the fixture.
Attaching the Softbox
1.
Open the adjustable corners held
together with straps and touch-
connect strips.
2.
Align the softbox with a 1 × 1 light so
the securing straps don’t interfere
with the light’s rear control panel.
Note: For Luxli’s Timpani, the securing straps should be on the
sides of the fixture, the buckles should be on the right, and the
strap that’s closest to the edge of the softbox is on top.
1
Produkspesifikasjoner
| Merke: | Angler |
| Kategori: | blitz |
| Modell: | LEDSB-1818 |
Trenger du hjelp?
Hvis du trenger hjelp med Angler LEDSB-1818 still et spørsmål nedenfor, og andre brukere vil svare deg
blitz Angler Manualer
18 August 2025
blitz Manualer
Nyeste blitz Manualer
19 August 2025
19 August 2025
19 August 2025
19 August 2025
19 August 2025
19 August 2025
19 August 2025
11 August 2025
4 August 2025
4 August 2025