Arcam FMJ AVR600 Bruksanvisning

Arcam Mottaker FMJ AVR600

Les nedenfor 📖 manual på norsk for Arcam FMJ AVR600 (68 sider) i kategorien Mottaker. Denne guiden var nyttig for 3 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/68

AVR600

HANDBOOK AVR surround amplier

 













English

E-2

safety

guidelines

Important safety instructions

is product is designed and manufactured to meet

strict quality and safety standards. However, you should

be aware of the following installation and operation

precautions.

1. Take heed of warnings and instructions

You should read all the safety and operating instructions

before operating this equipment. Retain this handbook

for future reference and adhere to all warnings in the

handbook or on the equipment.

2. Water and moisture

e presence of electricity near water can be dangerous.

Do not use the equipment near water – for example next

to a bathtub, washbowl, kitchen sink, in a wet basement

or near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not

spilled into the enclosure through any openings. Liquid-

lled objects such as vases should not be placed on the

equipment.

4. Placing the equipment

Only use a rack or shelf that is stable and strong enough

to support the weight of this equipment.

5. Ventilation

Do not place the equipment on a bed, sofa, rug or

similar so surface, or in an enclosed bookcase or

cabinet, since ventilation may be impeded.

6. Heat

Locate the equipment away from naked ames or heat-

producing appliances such as radiators, stoves or other

appliances that produce heat.

7. Climate

e equipment has been designed for use in moderate

climates and in domestic situations. Unplug this

equipment during lightning storms to prevent possible

damage from a strike or mains surge.

8. Cleaning

Unplug the unit from the mains supply before cleaning.

e case should normally only require a wipe with a so,

lint-free cloth. Do not use chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays or

polishes as they can cause permanent white marks.

9. Power sources

Only connect the equipment to a power supply of

the type described in the operating instructions or as

marked on the equipment.

e primary method of isolating the equipment from

the mains supply is to remove the mains plug. e

equipment must be installed in a manner that makes

disconnection possible.

10. Power-cord protection

Power supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon

or against them. Pay particular attention to the point

where they exit from the equipment.

11. Power lines

Locate any outdoor antenna/aerial away from power

lines.

12. Speaker connections

Any speakers must be connected to the AVR600 using

class II wire (i.e. no connection to Earth should be

made). Failure to observe this precaution may cause the

unit to become damaged.

13. Non-use periods

If the equipment is not being used for an extended

period, we recommend that you unplug the power cord

of the equipment from the outlet, to save power.

14. Abnormal smell

If an abnormal smell or smoke is detected from the

equipment, turn the power o immediately and unplug

the equipment from the wall outlet. Contact your dealer

and do not reconnect the equipment.

15. Servicing

You should not attempt to service the equipment.

Contact your dealer to arrange servicing.

16. Damage requiring service

e equipment should be serviced by qualied service

personnel when:

A. the power-supply cord or the plug has been

damaged, or

B. objects have fallen into, or liquid has spilled into the

equipment, or

C. the equipment has been exposed to rain, or

D. the equipment does not appear to operate normally

or exhibits a marked change in performance, or

E. the equipment has been dropped or the enclosure

damaged.

Safety compliance

is equipment has been designed to meet the IEC/EN

60065 international electrical safety standard.

is device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) is device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

Class II product

is equipment is a Class II or double

insulated electrical appliance. It has been

designed in such a way that it does not

require a safety connection to electrical

earth (‘ground’ in the U.S.).

Many of these items are common sense precautions but, for your own safety and to ensure that you do not damage the unit, we recommend that you read them.













CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified

service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of

uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric

shock to persons.