Atlona AT-VCC-RS232-KIT Bruksanvisning

Atlona Ikke kategorisert AT-VCC-RS232-KIT

Les nedenfor 📖 manual på norsk for Atlona AT-VCC-RS232-KIT (12 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 23 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 12 brukere

Side 1/12
Installation Guide
AT-VCC-RS232-KIT
1
IP to RS-232 Command Converter for Velocity Control
System
AT-VCC-RS232-KIT
The Atlona AT-VCC-RS232-KIT is an accessory for the Atlona Velocity Control System that
provides conversion between IP and RS-232 control commands. This Velocity Control Converter
The VCC-RS232-KIT is remotely powered through Power over Ethernet (PoE), or locally from a
USB power source. The primary unit installs onto any surface via a convenient mounting dock. A
simple click locks it into place for a secure, reliable installation. An RS-232 gender changer is
included.
1 x AT-VCC
1 x AT-VCC-RS232
Package Contents
Operating Notes
The AT-VCC-RS232-KIT is PoE, to power the unit, simply plug it into a PoE compatible
network switch. If the network switch is not PoE capable, a PoE injector (purchased separately)
or USB can be used.
All devices (AT-VCC, Velocity, AT-VTP, switchers, etc) should be set to static IPs or the
DHCP IP address reserved for each individual device.
IMPORTANT: Velocity Gateway (AT-VGW-HW) must be set up before the AT-VCC-RS232-
KIT is fully functional.

Produkspesifikasjoner

Merke: Atlona
Kategori: Ikke kategorisert
Modell: AT-VCC-RS232-KIT

Trenger du hjelp?

Hvis du trenger hjelp med Atlona AT-VCC-RS232-KIT still et spørsmål nedenfor, og andre brukere vil svare deg