Audiolab 6000A Bruksanvisning

Les nedenfor 📖 manual på norsk for Audiolab 6000A (16 sider) i kategorien Mottaker. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/16
User Instructions
6000A
Page 1
1: I
mpo tant Sa e y Informationr f t
one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from the
apparatus.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart or rack is used, use caution
w h e n m o v i n g t h e ca r t / a p p a r a t u s
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
CAUTION: These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you
are qualified to do so.
Do not install this equipment in a confined or built-in
space such as a bookcase or similar unit, and keep well
ventilated in open space. The ventilation should not
be impeded by covering the ventilation openings with
items such as newspaper, table-cloths, curtains etc.
WARNING: Only use attachments/accessories
specified or provided by the manufacturer (such as the
exclusive supply adapter, etc).
WARNING: Please refer to the information on the
exterior panel of the enclosure for electrical and
apparatus.
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
WARNING: For the terminals marked with symbol of
may be of sufficient magnitude to constitute a risk
of electric shock. The external wiring connected to the
terminals requires installation by an instructed person
or the used of ready-made leads or cords.
Mains Supply: The mains operating voltage of
Audiolab 6000 series units is shown on the rear panel.
If this voltage does not match the mains voltage in your
the unit.
The mains supply fuse on the rear panel is accessible
rare event that it has broken, check for any obvious
cause before replacing the fuse with one of the correct
rating and type.
The fuse values are:
220 – 240V (UK, China, etc.) T2.0AL 250V Slow Blow
100 – 120V (USA, Japan, etc.) T4.0AL 250V Slow Blow
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING: SHOCK HAZARD-DO NOT OPEN
This lightning flash with arrowhead symbol within an
the presence of non-insulated dangerous voltage
within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
Warning: To reduce the risk of electric shock, do
not remove cover (or back) as there are no user-
personnel.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance instructions in
the literature accompanying the appliance.
IMPORTANT SAFETY INFORMATION
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with
Important Safety
Information
Getting Started
Controls and Connectors
Remote Handset Warranty CoverageConnections Operation Specifications
Outputs:
Pre-Amplifier output.
Loudspeaker output.
Headphone output.
Unpacking
Unpack the product fully. The carton should contain:
The Audiolab 6000A
One IEC power cord suitable for your area.
One remote handset
This instruction manual.
One Bluetooth Antenna
If an item is missing or damaged report this to your dealer as soon as possible. Retain
the packing for safe transport of your unit. If you dispose of the packing, do so with
regard to any recycling regulation in your area.
Placement
The unit is designed to run warm during normal operation but ensure you do not
block any ventilation openings.
Place the unit on a sturdy shelf or table. If you use an equipment rack, ensure the unit
has adequate ventilation and is on its own shelf.
Check your mains voltage corresponds to the rating printed on the rear panel (near
the power inlet socket).
If in doubt, consult your dealer. If you move to an area with a different mains voltage
seek advice from an Audiolab appointed dealer or a competent service technician.
2: Getting Started
Welcome to Audiolab 6000 Series.
6000A is the latest in a long line of Audiolab integrated amplifiers with a pedigree that
stretches back to the very first 8000A that made Audiolab an overnight sensation.
The 6000A features analogue and digital audio circuitry of the highest quality
and has been designed by engineers who are passionate about the reproduction
of music, and we hope you will enjoy its performance for many years to come.
Please read through this manual to obtain the very best performance from your
6000A.
Features:
Bluetooth aptX
DAC – ES9018K2M
Dedicated high performance MM Phono Input.
Separate Pre-Power sections for flexibility of operation.
Automatic equipment activation via 12V trigger.
Auto standby function.
Inputs:
Three analogue line level inputs.
One Phono input (MM)
One Power-Amp input
Two Coaxial SPDIF digital inputs
Two Optical SPDIF digital inputs
Bluetooth (aptX)
Page 2
Important Safety
Information
Getting Started
Controls and Connectors
Remote Handset Warranty CoverageConnections Operation Specifications

Produkspesifikasjoner

Merke: Audiolab
Kategori: Mottaker
Modell: 6000A

Trenger du hjelp?

Hvis du trenger hjelp med Audiolab 6000A still et spørsmål nedenfor, og andre brukere vil svare deg




Mottaker Audiolab Manualer

Mottaker Manualer

Nyeste Mottaker Manualer