AXESS AX-ADGM04 Bruksanvisning

Les nedenfor 📖 manual på norsk for AXESS AX-ADGM04 (12 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 15 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 8 brukere

Side 1/12
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AX-ADGM04
I N S TA L L AT I O N I N S T R U C T I O N S
INTRODUCTION
INTERFACE FEATURES
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun, solder,
and heat shrink • Small flat-blade screwdriver
• Tape
• Wire cutter • Zip ties
TABLE OF CONTENTS
Connections to be made
For models
without
an amplifier .......................3
For models
with
an analog amplifier ................4
For models
with
a digital amplifier ...................5
12-pin pre-wired ASWC-1 harness ......................6
DIN jack ................................................................6
Installing & programming the AX-ADGM04
AX-ADBOX1 ...........................................................6
AX-ADBOX2 ..........................................................7
Adjusting the AX-ADGM04 ....................................8
Extra features .........................................................9
GM Data Interface 2012-2016
APPLICATIONS
See inside front cover
The AX-ADGM04 harness is designed for, and must be used with, the
AX-ADBOX1 or AX-ADBOX2 interface (sold separately). Please refer to the
AX-ADBOX1 or AX-ADBOX2 for the 16-pin connector with stripped leads
.
Provides accessory power (12-volt 10-amp)
Maintains the retained accessory power
(R.A.P.) feature
Provides NAV outputs (parking brake,
reverse, speed sense)
Retains chimes
Retains OnStar / OE Bluetooth
Adjustable OnStar level
Retains RSE (rear seat entertainment)
Retains satellite radio
Retains the factory AUX-IN jack
Pre-wired ASWC-1 harness
(ASWC-1 sold separately)
Can be used in non-amplified, or analog/
digital amplified models
Retains balance and fade†
Micro-B USB updatable
INTERFACE COMPONENTS
• AX-ADGM04 harness
• 4-pin to 4-pin resistor pad harness
† To retain fade in digital amplified models, use the AX-ADBOX1

Produkspesifikasjoner

Merke: AXESS
Kategori: Ikke kategorisert
Modell: AX-ADGM04

Trenger du hjelp?

Hvis du trenger hjelp med AXESS AX-ADGM04 still et spørsmål nedenfor, og andre brukere vil svare deg