AXESS AX-FT901 Bruksanvisning

Les nedenfor 📖 manual på norsk for AXESS AX-FT901 (8 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 16 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 8.5 brukere

Side 1/8
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AX-FT901
I N S TA L L AT I O N I N S T R U C T I O N S
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
TABLE OF CONTENTS
Connections to be made ....................................2-3
Installing the AX-FT901 interface ..........................3
Programming the ASWC-1 interface ................. 3-4
Screen operation ................................................4-6
Fiat 500 500L 2015 / 2014 (with U-Connect) Data Interface with SWC & Factory Display Retention
Provides accessory power
Designed for non-amplified models
Provides NAV outputs (parking brake, reverse, speed sense)
Retains audio controls on the steering wheel
Retains balance and fade
Retains most of the vehicle settings that was displayed on the
factory radio *
Micro “B” USB updatable
† For Continental Mopar head unit
* Attention!
The aftermarket radios backup camera input will be used to display the vehicle settings. If the radio doesn’t have a backup camera
Input, then there will be no visualization of the vehicle settings. An externally mounted screen could be substituted in this situation.
AX-FT901 interface
ASWC-1 interface
AX-FT901 harness
ASWC-1 harness

Produkspesifikasjoner

Merke: AXESS
Kategori: Ikke kategorisert
Modell: AX-FT901

Trenger du hjelp?

Hvis du trenger hjelp med AXESS AX-FT901 still et spørsmål nedenfor, og andre brukere vil svare deg