AXESS AX-MLOC725 Bruksanvisning

Les nedenfor 📖 manual på norsk for AXESS AX-MLOC725 (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 23 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 12 brukere

Side 1/3
INSTAX-MLOC725
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 11/26/13
AX-MLOC725
Installation Instructions
The Line Output Converter (LOC) should be installed on a stereos speaker output wires
or the output wires on an OEM amplifier of up to 150 watts per channel. These wires
can be found behind the stereo in the dash, on the outside of an OEM amplifier, or on the
Wire color and function
The audio input wire colors are an EIA standard for car stereo applications as follows:
Yellow = battery +12v input
Black = ground input
Blue = remote +12v output the above power wires can be connected directly
to the amplifier being added
White = left front (+) input
White/Black = left front (-) input
Gray = right front (+) input
Gray/Black = right front (-) input
Black/White = reference ground (-) (reference ground optional if noise is present)
Note: Be sure that all audio input connections are polarized or in phase with each other.
That is, the positive output wires from the audio source need to be connected to the
corresponding positive input wires of the LOC. The same goes for the negative audio
wires. Failure to do this will result in poor bass response and low quality audio.
(Continued on other side)

Produkspesifikasjoner

Merke: AXESS
Kategori: Ikke kategorisert
Modell: AX-MLOC725

Trenger du hjelp?

Hvis du trenger hjelp med AXESS AX-MLOC725 still et spørsmål nedenfor, og andre brukere vil svare deg