AXESS AX-PS Bruksanvisning
AXESS
Ikke kategorisert
AX-PS
Les nedenfor 📖 manual på norsk for AXESS AX-PS (4 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 19 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 10 brukere
Side 1/4
AX-PS
AX-PS
I N S T A L L A T I O N I N S T R U C T I O N S
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. INSTAX-PS4/11/23
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. INSTAX-PS4/11/23
A
B
AX-PS
INTERFACE COMPONENTS
• AX-PS Timer with wiring harness
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape
• Wire cutter
• Zip-ties
Universal-Amp Turn On/Off Timer
SETUP/SETTINGS
(Timer settings 0-30 seconds*)
*Turn-On Delay
•
Press left button (A) to enter the Turn-On delay setting,
the . Red LED flashes
•
Press left (A) and right (B) button to set up the delay, up to 30 seconds. If there is no
action for 3 seconds, it will return to display mode.
*Turn-Off Delay
• Press right button (B) to enter into Turn-Off Delay setting, the . Green LED flashes
• Press left
(A)
and right (B) button to set up the delay up to 30 seconds. If there is no
action for 3 seconds, it will return to display mode.
Note: Display will turn off after 3 minutes on inactivity. To turn on the display press
either the A or B button
Blue: Remote turn on output
Red: Remote turn on input
Yellow: 12v Constant
Black: Ground
SPECIFICATIONS
Working Voltage: 10v-16v
Trigger output current: 500mA
Trigger input Current: 1mA
TURN-ON DELAY
(GREEN LED)
TURN-OFF DELAY (RED LED)
A
B
AX-PS
INTERFACE COMPONENTS
• AX-PS Timer with wiring harness
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape
• Wire cutter
• Zip-ties
Universal-Amp Turn On/Off Timer
SETUP/SETTINGS
(Timer settings 0-30 seconds*)
*Turn-On Delay
•
Press left button (A) to enter the Turn-On delay setting,
the . Red LED flashes
•
Press left (A) and right (B) button to set up the delay, up to 30 seconds. If there is no
action for 3 seconds, it will return to display mode.
*Turn-Off Delay
• Press right button (B) to enter into Turn-Off Delay Green LED flashes setting, the .
• Press left
(A)
and right (B) button to set up the delay up to 30 seconds. If there is no
action for 3 seconds, it will return to display mode.
Note: Display will turn off after 3 minutes on inactivity. To turn on the display press
either the A or B button
Blue: Remote turn on output
Red: Remote turn on input
Yellow: 12v Constant
Black: Ground
SPECIFICATIONS
Working Voltage: 10v-16v
Trigger output current: 500mA
Trigger input Current: 1mA
TURN-ON DELAY
(GREEN LED)
TURN-OFF DELAY (RED LED)
Produkspesifikasjoner
| Merke: | AXESS |
| Kategori: | Ikke kategorisert |
| Modell: | AX-PS |
Trenger du hjelp?
Hvis du trenger hjelp med AXESS AX-PS still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert AXESS Manualer
6 August 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
Ikke kategorisert Manualer
- Lowel
- Perfect Christmas
- AOpen
- IsoTek
- Panamax
- Plastkon
- Alcon
- Bauknecht
- Optex
- Doro
- Apantac
- SKS
- Bliss Outdoors
- Bobrick
- DS18
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025