AXESS AXBUCH-T1 Bruksanvisning
AXESS
Ikke kategorisert
AXBUCH-T1
Les nedenfor 📖 manual på norsk for AXESS AXBUCH-T1 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 26 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 13.5 brukere
Side 1/2
AXBUCH-T1 AXBUCH-T1
INSTALL ATION INSTRUCTIONS INSTALL ATION INSTRUCTIONS
REV. 12/12/19 REV. 12/12/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com Integrate • AxxessInterfaces.com
INTERFACE FEATURES
• Retains the factory back-up camera to an aftermarket radio
• Allows an aftermarket camera to be added to the factory screen*
* Display and navigation model radios only
INTERFACE COMPONENTS
• AXBUCH-T1 harness
Toyota Back-Up Camera Retain/Add-On 2012-2015
Scion
FRS 2013-2015
iQ 2014-2015
tC 2014-2015
xB 2014-2015
xD 2014-2014
Toyota
4-Runner
(w/o factory amp) 2012-2013
Avalon 2013-2014
Camry 2012-2013
Highlander 2013
Prius 2012-2015
Prius PHV 2012-2015
Prius V 2012-2014
Rav-4 (before build
date Nov. 2013) 2014
Rav-4 2013
Sequoia 2013
Tacoma (with NAV) 2012-2013
Venza 2013-2014
• Cutting tool • Tape • Crimping tool
• Connectors (example: butt connectors, bell caps, etc.)
APPLICATIONS
TOOLS REQUIRED
Connections to be made
The AXBUCH-T1 can be connected two different ways
To retain the factory back-up camera to an aftermarket radio:
• Connect the wire to chassis ground.Black
• Connect the Yellow wire to accessory power. *
• Connect the male Yellow RCA jack to the rear camera input of the aftermarket radio.
• Connect the reverse wire from the aftermarket radio, to the reverse signal in the vehicle.
• Disregard the loose wire, it will not be used in this application.Green/Purple
* It is highly recommended to use the AXCSD-6V (sold separately) to provide the camera with
the proper voltage.
To allow an aftermarket camera to be added to the OEM screen:
• Connect the
Black
wire to the ground wire of the aftermarket camera.
• Connect the power wire of the aftermarket camera to accessory power.
• Tape off and disregard the
Yellow
wire, it will not be used in this application.
• Connect the female
Yellow
RCA jack to the aftermarket camera.
The following (2) steps are only required if a wire is
not present in the factory harness.
*Except Avalon 2013-2014 and Venza 2013-2014
• If a wire is not present in pin-2 of the 28-pin
connector of the factory radio, unplug the
connector, then insert the metal pin of the
loose wire into it. Connect the Green/Purple
harness back into the radio.
• Connect the other end of the loose Green/
Purple
wire to the reverse wire of the vehicle.
14 13 12 11 10 9 8 7 6 5 3 2 4 1
28 27 26 25 24 23 22 21 20 19 18 17 16 15
This is the wire view of the connector
in the vehicle
28 Pin Harness
Produkspesifikasjoner
| Merke: | AXESS |
| Kategori: | Ikke kategorisert |
| Modell: | AXBUCH-T1 |
Trenger du hjelp?
Hvis du trenger hjelp med AXESS AXBUCH-T1 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert AXESS Manualer
6 August 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
Ikke kategorisert Manualer
- A.O. Smith
- Chandler
- AJA
- Philips
- Algo
- Medion
- Rotatrim
- Tunturi
- Snow Joe
- Festo
- Pyrex
- Pioneer
- Flo
- Teka
- Rommelsbacher
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025