AXESS AXDI-6515 Bruksanvisning

Les nedenfor 📖 manual på norsk for AXESS AXDI-6515 (4 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 20 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 10.5 brukere

Side 1/4
AXDI-6515
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 9/14/23 INSTAXDI-6515
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter
TABLE OF CONTENTS
Connections LD-AX-XSVI-FT1.................................2
Installation .............................................................3
Programming .........................................................3
Fiat
500 Data Interface
2012-2015
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (Retained Accessory Power)
Used in both amplified and non-amplified systems
Provides NAV outputs (parking brake, reverse, speed sense)
Pre-wired AXSWC harness (AXSWC sold separately)
High level speaker input
Retains OE BT/USB and 3.5mm audio
Micro-B USB updatable
• AXDI-6515 Interface
• LD-AX-XSVI-FT1 Harness
Product Info
ATTENTION: With the key out of the
ignition, disconnect the negative battery
terminal before installing this product. Ensure
that all installation connections, especially the
air bag indicator lights, are plugged in before
reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included
with the aftermarket radio.
Visit AxxessInterfaces.com
for more detailed information about the product
and up-to-date vehicle specific applications

Produkspesifikasjoner

Merke: AXESS
Kategori: Ikke kategorisert
Modell: AXDI-6515

Trenger du hjelp?

Hvis du trenger hjelp med AXESS AXDI-6515 still et spørsmål nedenfor, og andre brukere vil svare deg