AXESS AXDIS-GMLN44 Bruksanvisning

AXESS Ikke kategorisert AXDIS-GMLN44

Les nedenfor 📖 manual på norsk for AXESS AXDIS-GMLN44 (12 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 20 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 10.5 brukere

Side 1/12
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AXDIS-GMLN44
I N S TA L L AT I O N I N S T R U C T I O N S
INTERFACE FEATURES
INTERFACE COMPONENTS
TABLE OF CONTENTS
Connections to be made ................................... 3-6
- For models
without
an amplifier .......................3
- For models
with
an analog amplifier ................4
- For models
with
a digital amplifier ...................5
- 3.5mm jack steering wheel control retention ..6
Installing the AXDIS-GMLN44 ................................6
Programming the AXDIS-GMLN44 ........................7
Adjusting the AXDIS-GMLN44 ...............................7
Steering wheel control settings ......................8-10
- L.E.D. feedback ....................................................8
- Changing radio type ...........................................8
- Remapping the steering wheel control buttons ..9
- Dual assignment instructions
(long button press) ............................................10
Troubleshooting ....................................................11
GM Data Interface with SWC 2012-2016
Provides accessory power
(12-volt 10-amp)
Retains R.A.P. (retained
accessory power)
Provides NAV outputs (parking
brake, reverse, speed sense)
Retains chimes
Retains audio controls on the
steering wheel
Retains OnStar / OE Bluetooth
Adjustable OnStar level
Retains the factory AUX-IN jack
Can be used in non-amplified, or
analog/digital amplified models
Retains balance and fade
(excluding digital amplified
models)
Micro “B” USB updatable
• AXDIS-GMLN44 interface • AXDIS-GMLN44 harness
• 16-pin harness with stripped leads • 4-pin to 4-pin resistor pad harness
• Female 3.5mm connector with stripped leads
APPLICATIONS
See inside front cover
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape • Connectors (example: butt-connectors, bell caps, etc.) • Small flat-blade screwdriver

Produkspesifikasjoner

Merke: AXESS
Kategori: Ikke kategorisert
Modell: AXDIS-GMLN44

Trenger du hjelp?

Hvis du trenger hjelp med AXESS AXDIS-GMLN44 still et spørsmål nedenfor, og andre brukere vil svare deg