AXESS AXDIS-TY3 Bruksanvisning
AXESS
Ikke kategorisert
AXDIS-TY3
Les nedenfor 📖 manual på norsk for AXESS AXDIS-TY3 (24 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 9 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 5 brukere
Side 1/24
AXDIS-TY3
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 6/12/24 INSTAXDIS-TY3
INTERFACE FEATURES
TOOLS REQUIRED
Toyota Interface with SWC 2018-2021
APPLICATIONS
• Designed for both amplified and non-amplified models
• Provides accessory power (12-volt 10-amp)
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains the factory AUX-IN jack
• Retains the factory backup camera
• Includes an AXCSD-6V 12-to-6V step-down for the factory camera
• Retains audio controls on the steering wheel
• Retains balance on amplified models
(non-amplifed models retain balance and fade)
• Micro-B USB updatable
TOYOTA
4Runner ....................... 2020-Up
Avalon .......................... 2019-Up
C-HR ............................. 2019-Up
Camry........................... 2018-Up
Corolla .......................... 2019-Up
Highlander ................... 2020-Up
RAV4 ............................ 2019-Up
Sequoia ........................ 2020-Up
Sienna .......................... 2018-Up
Tacoma ........................ 2020-Up
Tundra ......................... 2020-2021
INTERFACE COMPONENTS
• AXDIS-TY3 interface • AXDIS-TY3 harness (LD-TYAMP3-SWC)
• Female 3.5mm connector with stripped leads
• AXCSD-6V
TABLE OF CONTENTS
Connections:
LD-TYAMP3-SWC ....................................................2
3.5mm Jack Steering Wheel Control Retention
... 3
Installing the AXDIS-TY3........................................3
Programming the AXDIS-TY3 ...............................4
Audio Level Adjustment .......................................4
Steering Wheel Control Settings ......................5-8
LED Feedback .......................................................5
Changing Radio Type ..........................................6
Remapping the SWC Buttons .............................7
Dual Assignment Instructions
.............................8
Troubleshooting.....................................................9
Product Info
Visit AxxessInterfaces.com for more detailed information
about the product and up-to-date vehicle specific applications.
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Small flat-blade screwdriver
• Tape
• Wire cutter
• Zip ties
ATTENTION: With the key out of the ignition, disconnect
the negative battery terminal before installing this product.
Ensure that all installation connections, especially the air
bag indicator lights, are plugged in before reconnecting the
battery or cycling the ignition to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
Produkspesifikasjoner
| Merke: | AXESS |
| Kategori: | Ikke kategorisert |
| Modell: | AXDIS-TY3 |
Trenger du hjelp?
Hvis du trenger hjelp med AXESS AXDIS-TY3 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert AXESS Manualer
6 August 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
Ikke kategorisert Manualer
- Insta360
- GW Instek
- Harvia
- Thule
- Kluge
- I-Tec
- Deltaco Gaming
- Interstuhl
- Ultimate
- Mean Well
- JMAZ Lighting
- Focusrite
- TK Audio
- Steinbach
- Jenn-Air
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025