AXESS AXLOC-150A Bruksanvisning

Les nedenfor 📖 manual på norsk for AXESS AXLOC-150A (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 24 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 12.5 brukere

Side 1/3
AXLOC-150A
INSTALL ATION I N STRUCTION S
REV. 12/18/19
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
Wire Color & Function: The audio and power input wire colors are an EIA standard for
car stereo applications as follows.
Note: Be sure that all audio input connections are polarized or in phase with each other.
corresponding positive input wires of the AXLOC-150A. The same goes for the negative
audio wires. Failure to do this will result in poor bass response and low quality audio.
Adjusting the AXLOC-150A for maximum performance:
After completing all of the necessary connections, turn the AXLOC-150A adjustment pots all of the
way down by rotating them completely counter-clockwise. Now, turn the stereo system on and
adjust the main volume control on the stereo to approximately 3/4 maximum volume. Select
one of the adjustment pots on the AXLOC-150A and turn it slowly clockwise until you notice audio
distortion and then stop. Turn the remaining pot to the same position as the previously adjusted
pot. The audio set-up of the AXLOC-150A is now complete and ready to be enjoyed.
INPUT HARNESS
White = LEFT Front (+) Input
White/Black = LEFT Front (-) Input
Black = Reference Ground (-)
(Reference ground optional if noise is present)
Gray = RIGHT Front (+) Input
Gray/Black = RIGHT Front (-) Input

Produkspesifikasjoner

Merke: AXESS
Kategori: Ikke kategorisert
Modell: AXLOC-150A

Trenger du hjelp?

Hvis du trenger hjelp med AXESS AXLOC-150A still et spørsmål nedenfor, og andre brukere vil svare deg