AXESS AXLOC-55SP Bruksanvisning
AXESS
Ikke kategorisert
AXLOC-55SP
Les nedenfor 📖 manual på norsk for AXESS AXLOC-55SP (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 21 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 11 brukere
Side 1/2
AXLOC-55SP
INSTALL ATION INSTR UCTIONS
REV. 4/27/20
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
Wire Color & Function: The audio input wire colors are an EIA standard
for car stereo applications as follows.
INPUT HARNESS
= GroundBlack
Yellow - Battery +12V input
= Remote +12V outputBlue
= Left front (+) inputWhite
= Left front (-) inputWhite/Black
= Right front (+) inputGray
Gray/Black = Right front (-) input
= Reference ground (-)Brown
(Reference ground optional if noise is present)
Note:
Be sure that all audio input connections are polarized or in
phase with each other. That is, the positive output wires from the audio
source need to be connected to the corresponding positive input wires
of the AXLOC-55SP. The same goes for the negative audio wires. Fail-
ure to do this will result in poor bass response and low quality audio.
Adjusting the AXLOC-55SP for maximum performance: After complet-
ing all of the necessary connections, turn the AXLOC-55SP adjustment
pots all of the way down by rotating them completely counter-clock-
wise. Now, turn the stereo system on and adjust the main volume con-
trol on the stereo to approximately 3/4 maximum volume. Select one
of the adjustment pots on the AXLOC-55SP and turn it slowly clockwise
until you notice audio distortion and then stop. Turn the remaining pot
to the same position as the previously adjusted pot. The audio set-up
of the AXLOC-55SP is now complete and ready to be enjoyed.
The AXLOC-55SP is designed to convert speaker level audio to line level
audio. This allows for the installation of line level products such as amplifiers,
EQs and crossovers on systems that do not have RCA line level outputs. In
addition this device will also detect the presence of an audio signal and then
generate a +12V output that can be used to turn-on an aftermarket amplifier.
Features:
55 Watts Maximum Input, Input Circuit Corrects Crossover Distortion Commonly
Found On Other Brands of LOCs, 6:1 Step Down with Variable Output,
Detachable Input Plug, Gold Plated RCAs, Attractive & Durable Enclosure
2 Channel, Adjustable Line Output Converter
Produkspesifikasjoner
| Merke: | AXESS |
| Kategori: | Ikke kategorisert |
| Modell: | AXLOC-55SP |
Trenger du hjelp?
Hvis du trenger hjelp med AXESS AXLOC-55SP still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert AXESS Manualer
6 August 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
26 Februar 2025
Ikke kategorisert Manualer
- Black Hydra
- Interstuhl
- Infosec
- Weidmüller
- Martin Audio
- Blackburn
- Ultimate
- Glemm
- Global Water
- Tivoli Audio
- LightKeeper Pro
- Totolink
- Proaim
- Nanoleaf
- Stanley
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025