AXESS AXLOC-CH5 Bruksanvisning

AXESS Ikke kategorisert AXLOC-CH5

Les nedenfor 📖 manual på norsk for AXESS AXLOC-CH5 (8 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 21 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 11 brukere

Last ned PDF

Side 1/8

AXLOC-CH5

I N S TA L L AT I O N I N S T R U C T I O N S

ATTENTION: With the key out of the

ignition, disconnect the negative battery

terminal before installing this product.

Ensure that all installation connections,

especially the air bag indicator lights, are

plugged in before reconnecting the battery

or cycling the ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip-ties

TABLE OF CONTENTS

Applications 1 ............................................................

Installation 2 .............................................................

Connections: LD-AXLOC-CH5 3 .................................

Chrysler LOC (Line Output Converter)

AXLOC-CH5

(for Non-Amplified Vehicles)

2013-

APPLICATIONS

Chrysler

200 2015-2017 ..................................

Pacifica 2017-2020 ...........................

Dodge

Dart 2011-2014 ..................................

Durango 2011-2020 ..........................

1500, 2500, 3500 2013-Up ...............

Fiat

500 2016-2019 ..................................

500L 2014-2020 ...............................

500X 2016-2021 ................................

Jeep

Cherokee............................2013-Up

Compass 2017-2023 .........................

Renegade 2015-2023 .......................

Wrangler (JL) 2018.5-Up ................

Wrangler (4XE) 2021-2022 ..............

Ram

Chassis Cab

2500/3500/4500/5500

....2013-Up

Promaster

1500/2500/3500 2014-2023 ........

Promaster City 2015-2021 ...............

Visit for more detailed information about the product and up-to-date vehicle specific applicationsAxxessInterfaces.com

KIT COMPONENTS

For dash disassembly instructions, refer to . Enter the year, make, and model of the vehicle in the for .metraonline.com Vehicle Fit Guide Radio Install Kits

•

Designed to provide (2) channels of low-level audio output from the factory system.

• Allows for the installation of an amplifier for speakers or subwoofers.

• Gain Controller included to adjust the overall output. (Optional)

• 12v-500mA remote wire activated with signal sense.

• 55-watts per channel

• Designed for non-amplified vehicles.

Note: A single pole double throw (SPDT) relay is recommended when installing multiple amplifiers.

• AXLOC-CH5 Wiring Harness

• Gain Controller

• 12v-500mA Remote Wire

• Auxiliary Cable