AXESS AXLOC-GMLN1 Bruksanvisning

AXESS Ikke kategorisert AXLOC-GMLN1

Les nedenfor 📖 manual på norsk for AXESS AXLOC-GMLN1 (8 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 21 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 11 brukere

Last ned PDF

Side 1/8

AXLOC-GMLN1

INSTALLATION INSTRUCTIONS

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the

ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip-ties

TABLE OF CONTENTS

Applications.............................................................1

Installation ............................................................. 2

Diagram .................................................................. 3

GM LOC (Line Output Converter) AXLOC-GMLN1

(for Non-Ampliﬁed Vehicles) 2006-2021

APPLICATIONS

Buick

Lucerne 2006-2011

Cadillac

DTS 2006-2011

Escalade 2007-2014

SRX 2007-2009

Chevrolet

Avalanche 2007-2013

Captiva Sport 2012-2015

Cheyenne (RPO IOB) 2016-2018

Chevrolet (cont.)

Cheyenne 2012-2014

Equinox 2007-2009

Express van (Full Size) 2008-2021

Impala Limited (Fleet) 2014

Impala 2006-2013

Monte Carlo 2006-2007

Silverado Pickup 2007-2013

Spark (RPO IOB) 2016-2018

Suburban 2007-2014

Chevrolet (cont.)

Tahoe 2007-2014

Traverse 2009-2017

GMC

Acadia 2007-2016

Savanna Full Size Van 2008-2014

Sierra (New Body) 2007-2013

Sierra 2500/3500 2014

Yukon XL / Denali 2007-2014

Yukon 2007-2014

Hummer

H2 2008-2009

Pontiac

Torrent 2007-2009

Saturn

Outlook 2007-2009

VUE 2008-2009

Suzuki

XL-7 2007-2009

KIT COMPONENTS

• AXLOC-GMLN1 Wiring Harness

• Gain Controller

• 12v-500mA Remote Wire

• Auxiliary Cable

For dash disassembly instructions, refer to metraonline.com. Enter the year, make, and model of the vehicle in the Vehicle Fit Guide for Radio Install Kits.

• Designed to provide (2) channels of low-level audio output from the factory system.

• Allows for the installation of an ampliﬁer for speakers or subwoofers.

• Gain Controller included to adjust the overall output.

• 12v-500mA remote wire activated with signal sense.

• 55-watts per channel

• Designed for non-ampliﬁed vehicles.

Note: A single pole double throw (SPDT) relay is recommended when installing multiple ampliﬁers.

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle speciﬁc applications.