AXESS AXTC-LN30 Bruksanvisning

Les nedenfor 📖 manual på norsk for AXESS AXTC-LN30 (4 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 16 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 8.5 brukere

Side 1/4
AXTC-LN30
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 3/14/23 INSTAXTC-LN30
Visit AxxessInterfaces.com for more detailed information
about the product and up-to-date vehicle specific applications
ATTENTION:
With the key out of the ignition,
disconnect the negative battery terminal before
installing this product. Ensure that all installation
plugged in before reconnecting the battery or cycling
the ignition to test this product.
NOTE:
Refer also to the instructions included with the
aftermarket accessory before installing this device.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Connections ............................................................2
Programming .........................................................3
Troubleshooting .....................................................4
GM Data Interface with SWC 2019-Up
APPLICATIONS
Provides retained accessory
power (10-amp)
Provides illumination, parking
brake, reverse, and speed sense
outputs
Retains warning chimes
through an onboard speaker
Retains audio controls on the
steering wheel
Designed to be compatible with
all major radio brands
Auto detects vehicle type, radio
connection, and preset controls
Ability to dual assign steering
wheel control buttons
Retains memory settings even
after battery disconnection or
interface removal (non volatile
memory)
Designed for non-amplified
models, or when bypassing a
factory amplifier
Retains balance and fade
Micro-B USB updatable
Chevrolet
Blazer ** .............................2019-Up(1)
Camaro ** ..........................2019-Up(2)
Cheyenne ** ....................2019-2021(2)
Colorado ...........................2019-Up(2)
Equinox ** .........................2019-Up(2)
Malibu ** ...........................2019-Up(3)
Silverado ** .....................2019-2021(2)
Volt ................................................ 2019
GMC
Acadia ** ...........................2019-Up(4)
Canyon ..............................2019-Up(2)
Sierra 1500 ** ..................2019-2021(2)
Terrain ** ...........................2019-Up(5)
Cadillac
XT4...........................................2019-Up
• AXTC-LN30 interface
• AXTC-LN30 harness
• 3.5mm adapter
(1) IOT or IOU code radio †
(2) IOS or IOT code radio †
(3) IOU or IOS code radio †
(4) IOU code radio †
(5) IOS, IOT, or IOU code radio †
** For extension, use AXEXH-GM30
† The radio code can be found in the located:Service Parts Identification Label
Glove box – Equinox/Terrain
QR only (see note) - Acadia/Blazer/Camaro/Canyon/Colorado/Malibu/Sierra/Silverado
Note: Newer model GM vehicles are transitioning to a QR style label. If the Service Parts
Identification Label is not located where listed, reference the Vehicle Certification Label
on the inside of the driver’s door opening for the QR code.

Produkspesifikasjoner

Merke: AXESS
Kategori: Ikke kategorisert
Modell: AXTC-LN30

Trenger du hjelp?

Hvis du trenger hjelp med AXESS AXTC-LN30 still et spørsmål nedenfor, og andre brukere vil svare deg