AXESS TYTO-01 Bruksanvisning

Les nedenfor 📖 manual på norsk for AXESS TYTO-01 (8 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 13 personer og ble vurdert med 4.2 stjerner i gjennomsnitt av 7 brukere

Side 1/8
AXTO-TY1
I N S TA L L AT I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/3/22 INSTAXTO-TY1
Attention: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
NOTE: Refer to the instructions included with
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip-ties
• Small flat-blade screwdriver
TABLE OF CONTENTS
Connections .........................................................2-3
Installation .............................................................3
Programming .........................................................3
Audio level adjustment .........................................3
Wiring diagram ......................................................4
Toyota Digital Amplifier Interface 2001-2015
Designed for amplified models
Retains balance and fade
USB Micro-B updatable
• AXTO-TY1 harness
• AXTO-TY1 interface
• 16-pin harness with stripped leads
APPLICATIONS
See inside front cover
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications

Produkspesifikasjoner

Merke: AXESS
Kategori: Ikke kategorisert
Modell: TYTO-01

Trenger du hjelp?

Hvis du trenger hjelp med AXESS TYTO-01 still et spørsmål nedenfor, og andre brukere vil svare deg