BaByliss Super-X Metal 7066U Bruksanvisning
BaByliss
Grooming sett
Super-X Metal 7066U
Les nedenfor 📖 manual på norsk for BaByliss Super-X Metal 7066U (8 sider) i kategorien Grooming sett. Denne guiden var nyttig for 7 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/8
SUPER-X METAL SERIES
NOSE, EAR & EYEBROW TRIMMER
7066U
SAFETY CAUTIONS
• This appliance should only be used as described within
this instruction book. Please retain for reference.
IMPORTANT CHILD SAFETY
• ALWAYS keep out of the reach of children (during and
after use).
• This appliance should not be used, cleaned or maintained
by children.
• Always take extra care if used on children or near children.
• Do not use on very young children.
IMPORTANT SAFETY
WARNING! Do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
• Do not immerse the appliance in water or other liquids.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged or if the
appliance has been dropped. In the event of damage
contact the Conair Customer Care Line (refer to ‘UK After
Sales Service’ section for further information).
• Only use the attachments supplied with this appliance.
• Do not leave the appliance unattended when switched
on.
• Do not place the appliance on any surface whilst in
operation.
• Special care is required when using the appliance close
to the ears, eyes and face.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
• This product uses 1x AA battery.
• Insert the battery as indicated on the inside of the battery
compartment.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries must be removed from the device
before being re-charged.
• If the appliance is to be stored unused for a long period,
the batteries should be removed.
• The supply terminals are not to be short-circuited.
• When the battery has run down, it should be disposed
of at a recycling centre to safeguard the environment. If
the battery leaks, avoid touching it and dispose of it at a
recycling centre.
• For indoor, household, domestic use only.
• This product complies fully with all appropriate EU
and UK Legislation and the standards relevant to this
type and class of appliance. We are an ISO9001:2015
certied company that continually evaluates our Quality
Management System performance. If you have any
queries regarding product safety and compliance, please
contact the Conair Customer Care Line (refer to ‘UK After
Sales Service’ section).
INSTRUCTIONS FOR USE
General
• Always inspect the appliance before use for noticeable signs of
damage. Do not use if damaged.
• Ensure the trimming heads are free from hair and debris (refer to
‘Cleaning and Maintenance’ section for further information).
Changing Trimmer Heads
• Your trimmer is supplied with 2 interchangeable cutting
heads.
• To remove a trimming head, turn the head anti-
clockwise until the ‘I’ mark aligns with the ‘ ’
mark, then lift the head gently. (Fig. 1).
• To reassemble the head onto the body, align the ‘I’
mark on the head with the ‘ ’ mark on the body
and then turn clockwise until the ‘I’ mark aligns with
the ‘circle’ mark on the body (Fig. 2).
Using the Eyebrow Trimmer head
This attachment can be used to trim eyebrows,
sideburns and tidy stray facial hair.
Without the comb guide
• Switch the trimmer on by turning the bottom section
of the trimmer so that the two ‘I’ symbols align (Fig. 3).
• Move the trimmer upwards and outwards through the
hair you wish to remove.
Fig. 1
Fig. 2
Fig. 3
With the comb guide
• There are 2 comb guides. The smaller guide cuts to approximately
3mm and works well on necklines and sideburns. The larger guide
cuts hair to approximately 5mm and is perfect for eyebrows and
facial hair.
• Slide the comb guide onto the trimmer blade and push down to lock
into place – you will hear a clicking noise when it’s in position.
• Switch the trimmer on.
• Move the comb guide through the hair you wish to remove following
the direction of hair growth until you reach the desired length.
TRIMMING TIPS
• Place the trimmer at a slight right angle to the skin and trim in the
direction of hair growth.
• Continue trimming in the direction of growth. Be careful not to apply
excess pressure to the blade. This may damage the blade, and can
result in injury to the skin during trimming.
• Pull the skin rmly with one hand during the trimming process to
ensure the closest possible shave.
Using the Nose and Ear Trimmer head
• Switch the trimmer on by turning the bottom section of the trimmer
so the two ‘I’ symbols align.
• Gently insert the trimmer into your nose or ear to trim unwanted hair.
• Gently move it in a circular motion.
• Never switch the trimmer off whilst in the nose and ear hair.
Note: Use this trimmer only at the entrance to the ears or nose. Do not
use any deeper than this – this can cause injury.
CLEANING AND MAINTENANCE
To maintain optimum performance, the appliance should be cleaned after
each use.
• Ensure the appliance is switched off.
• Gently blow any hairs from the trimmer head.
• Each head can be removed and rinsed under the tap.
Produkspesifikasjoner
| Merke: | BaByliss |
| Kategori: | Grooming sett |
| Modell: | Super-X Metal 7066U |
Trenger du hjelp?
Hvis du trenger hjelp med BaByliss Super-X Metal 7066U still et spørsmål nedenfor, og andre brukere vil svare deg
Grooming sett BaByliss Manualer
4 Januar 2025
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
Grooming sett Manualer
Nyeste Grooming sett Manualer
18 August 2025
2 April 2025
29 Mars 2025
27 Mars 2025
13 Mars 2025
13 Mars 2025
13 Mars 2025
13 Mars 2025
8 Februar 2025
8 Februar 2025