BarberBoss QR-7103 Bruksanvisning
BarberBoss
tanntrådutstyr
QR-7103
Les nedenfor 📖 manual på norsk for BarberBoss QR-7103 (8 sider) i kategorien tanntrådutstyr. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/8
QR-7103
Welcome to BarberBoss and congratulations on your new purchase! Secure your peace of
mind by activating your 12-month warranty and claiming an extra 6 months for free at
www.barberboss.co.uk/barberboss-product-warranty. Beyond our warranty, you are also
covered by your country's legal consumer rights, ensuring complete protection for your
purchase.
Product Structure and Accessories
10 11 12 13
1. Nozzle
2. Nozzle Rotation Dial
3. USB Charging Port
4. Nozzle Release Button
5. Power Button
6. Mode Selection Button
7. Mode Indicator Lights
8. Water Tank
9. Water Inlet
10. USB Charging Cable
11. Orthodontic Tip
12. Periodontal Tip
13. Standard Tip
Product Details
Product Name
QR-7103 Oral Irrigator
Model Number
QR-7103
Charging Input
5V 1.0A
Water Tank Capacity
340ml
Charging Time
6 Hours
Usage Time
Up to 60 Days
What’s Included
Water Flosser
x1
Standard Tip
x2
Orthodontic Tip
x1
Periodontal Tip
x1
Charging Cable
x1
Nozzle Tips: Function and Usage
Nozzle Type
Usage
Recommended
Replacement Interval
Standard Tip
Ideal for everyday cleaning and
removing food debris between
teeth and gums.
Every 3 Months
Orthodontic Tip
Designed for cleaning around
braces, brackets, and other
orthodontic devices.
Every 3 Months
Periodontal Tip
Gently cleans deep below the
gumline to treat gum disease and
improve health.
Every 3 Months
Instructions For Use
1. Power On/Off:
● Start Flossing: Insert the tip, then press the power button to begin irrigating. The
device has a 2-minute auto-stop timer or can be turned off manually by pressing the
power button again.
● Turn Off: Once finished, press the power button to turn off the device.
● Empty and Drain: Empty any remaining water from the tank, then run the device for
2-3 seconds to drain residual water.
2. Inserting and Removing the Nozzle:
● Insert the nozzle into the top of the water flosser handle, pressing firmly until a clicking
sound is heard, confirming it is securely inserted in place (Figure 1).
● To remove the nozzle, press the nozzle tip release button and gently pull the nozzle
out (Figure 1).
● Note:
○ Do not press the tip release button while the device is operating.
○ If the nozzle head doesn’t spray water immediately after turning on the
device (particularly after first use or long periods of inactivity), follow steps:
1. Add a small amount of water to the tip insertion area (Figure 2). 2. Insert a
new tip and press the power button to activate the device.
Figure 1 Figure 2
3. Installing and Filling the Water Tank:
● Open the water tank cap, fill with water, and close the cap securely (Figure 3).
● To detach or attach the water tank, simply twist it:
○ Place the device on a flat surface.
○ Hold the water tank with your left hand and twist the upper part to the right
with your right hand to detach.
○ To reattach, twist in the opposite direction.
● Note: Use water or a dental professional-recommended solution only when filling
the tank.
Produkspesifikasjoner
| Merke: | BarberBoss |
| Kategori: | tanntrådutstyr |
| Modell: | QR-7103 |
Trenger du hjelp?
Hvis du trenger hjelp med BarberBoss QR-7103 still et spørsmål nedenfor, og andre brukere vil svare deg
tanntrådutstyr BarberBoss Manualer
15 September 2025
tanntrådutstyr Manualer
Nyeste tanntrådutstyr Manualer
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025