BEKO BDIN25321 Bruksanvisning

BEKO Oppvaskmaskin BDIN25321

Les nedenfor 📖 manual på norsk for BEKO BDIN25321 (3 sider) i kategorien Oppvaskmaskin. Denne guiden var nyttig for 29 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/3

Operating the product

Read “Safety Instructions” section first!

Quick Guide

1. On/Off key

2. Programme Selection / Programme Cancel (3 seconds) key

3. Function keys

4. Programme indicator

5. Salt indicator

7. Start / Cancel indicator

8. Time Delay / Programme Time indicator

9. Time Delay key

10. Time Delay indicator

11. End of Programme indicator

12.

13. Rinse Aid indicator

Not in use

Half Load function

Tablet detergent function

2 4 5 6 7 8 3 9

111213

Tablet detergent indicator

012345

InnerClean Eco * Intensive Quick&Shine (#) Mini (#) Prewash

50 ºC 70 ºC 60 ºC 35 ºC -

This programme is

recommended to be

operated on every

1-2 months for

machine cleaning

and necessary

hygiene. The

programme should

be operated while

the machine is

empty.

In order to achieve

an efficient result

use together with

special machine

cleaning agents.

Suitable for washing

dishes with normal

amount of soil. It is

the most efficient

program in terms of

combined power and

water consumption.

This is used for

assessing the

compliance with EU's

eco-design directive.

Suitable for heavily

soiled dishes, pots

and pans.

Daily washing

programme for

normally soiled

dishes in the fastest

way.

Suitable for lightly

soiled daily dishes

that are scraped or

pre-cleaned.

Suitable for

removing the

remnants on the

soiled dishes that will

be kept waiting in the

machine for a few

days, and thus, for

preventing the bad

odour buildup.

- -Medium High Medium Low

- + + - - +

- + + + + -

- + + + - -

75 205 120 58 30 15

15,2 12,9 17,6 11,8 11,8 4,2

0,7 1,2 0,80,937 1,65 -

Degree of Soiling

Energy (kWh)

Prewash

Wash

Dry

Duration (min)

Water (I)

Programme Data and Average Consumption Values Table

Loading Capacity: 13

EN 60436:2016 The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * Reference programme for testing institutes.

The tests in accordance with EN 50242/60436 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme. The values given for programmes other than

Eco 50°C programme are indicative only. (#) Additional functions might cause changes in programme durations.

Programme number

Programme name

Cleaning temperature

Adjusting the water softening system

•Unpack the test strip.

•Open the tap and let the water flow for approx. 1

minute.

•Dip in the test strip into the water for 1 second.

•Take out the strip from the water and shake it.

•Wait for 1 minute.

•Make the necessary adjustment according to the test

strip.

Level 0

Level 1

Level 2

Level 3

Level 4

Level 5

After detecting the water hardness:

1. After turning on the machine, press Delayed Start and P+/P keys simultaneously. After

the countdown (3, 2, 1) is displayed keep the keys pressed for a while.

2. Press P+/P key to activate the position.

3. Using Delayed Start key, adjust water hardness level according to the hardness of the

supply water. See “Water hardness level adjustment table” for correct setting.

4. Press On / Off key to save the setting.

Water hardness level adjustment table

Hardness

Level

English Water

Hardness °dE

German Water

Hardness °dH

French* Water

Hardness °dF

Water Hardness Level Indicator

Level 0

0-5 0-4 0-8