Blustream NPA70DA Bruksanvisning
Les nedenfor 📖 manual på norsk for Blustream NPA70DA (19 sider) i kategorien Mottaker. Denne guiden var nyttig for 24 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 12.5 brukere
Side 1/19
NPA70DA
User Manual
RevA2_User_Manual_NPA70DA
DANTE(PoE)
TCP/IP
CONTROL
TX
RX
RS-232
T
TRG
S
V
IR IN IR
5V 12V
R+ R- L+ L- 100V 70V COM
+
BRIDGED
-
SPEAKER OUTPUT
4Ω
8Ω
70V
100V
NPA70DA
VOLUME
Dante Networked Power Amplier
MODE 1 MODE 2
NETWORK
24V 3.5A
NPA70DA USER MANUAL
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk02
Surge Protection Device
Recommended
This product contains sensitive
electrical components that may be
damaged by electrical spikes, surges,
electric shock, lightning strikes, etc.
Use of surge protection systems is
highly recommended in order to
protect and extend the life of your
equipment.
Contents
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions care-
fully before connecting, operating or
adjusting this product. Please keep this
manual for future reference.
Introduction 03
Features 03
Front Panel Description 04
Rear Panel Description 04
Speaker Connections 05
Audio Connections 05
Trigger Connection 06
IR Connection 06
Network Connections 06
Dante® Audio & Dante® Controller 07-08
Advanced Dante® Settings 08
Web GUI Control 09-13
Schematic 14
Telnet & RS-232 Control Port 15-16
Specifications 17
Package Contents 17
Maintenance 17
Acknowledgements 18
Certifications 18
NPA70DA USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 03
Our NPA70DA networked audio zone amplifier delivers advanced audio
integration within a commercial or residential AV installation.
The NPA70DA features a 2 x 35W digital amplifier (1 x 70W mono) or 70V / 100V
hi-level constant voltage output and Dante® audio integration.
The NPA70DA can be powered via PoE++ from a compatible network switch, or
locally should the switch not support PoE++. The unit also includes the ability
to lower the amplifier power output subject to PoE capabilities, support for
combined or independent LAN and Dante® connections, DSP with a 31 band
EQ, audio delay for lip sync correction, and control via front panel, IR, RS-232,
TCP/IP, web-GUI or 12V trigger.
Introduction
FEATURES:
• Advanced network audio amplifier with Dante® integration
• Supports 2 x 35W @ 4 / 8 ohm, 1 x 70W @ 4 / 8 ohm or 70 / 100V constant output for multiple speakers with longer
cable runs
• Supports power via PoE++ on Dante® LAN connection or local power supply*
• Dual network option - independent Dante® and LAN control ports, or combined to a single LAN
• 2ch Dante® / AES67 audio input
• DSP with 31 band EQ with +3dB/-10dB and audio delay
• Local 12V input trigger for automated power control
• Control via front panel, IR, RS-232 and IP
• Auto standby mode with signal sensing
• In-built web-GUI for setup and control
* Amp power limited when using PoE+
Produkspesifikasjoner
| Merke: | Blustream |
| Kategori: | Mottaker |
| Modell: | NPA70DA |
Trenger du hjelp?
Hvis du trenger hjelp med Blustream NPA70DA still et spørsmål nedenfor, og andre brukere vil svare deg
Mottaker Blustream Manualer
15 Januar 2025
Mottaker Manualer
- NUVO
- DARTS
- Intelix
- Hertz
- Morel
- Fusion
- Block
- Parasound
- Shanling
- Loxjie
- Advance
- Sunfire
- Palmer
- Power Dynamics
- Shure
Nyeste Mottaker Manualer
30 September 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
29 September 2025
29 September 2025
29 September 2025