Brentwood SG-2321S Bruksanvisning

Les nedenfor 📖 manual på norsk for Brentwood SG-2321S (10 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 13 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/10
© 2021 Brentwood Appliances, Inc.
ELECTRIC SALT AND PEPPER MILLS
MOLINOS ELÉCTRICOS DE SAL Y PIMIENTO
ITEM NO.: SG-2321S
Operating and Safety Instructions
FOR HOUSEHOLD USE ONLY
Instrucciones de Operación y Seguridad
SOLO PARA USO DOMESTICO
2
IMPORTANT SAFEGUARDS
When using this appliance always follow basic safety precautions, especially when
children are present.
READ ALL INSTRUCTIONS BEFORE USE
WARNING - This is not a toy. Please keep this product away from children.
This product is not intended for use by children.
Keep the product out of reach of children and pets.
Do not leave the product unattended while it is in use.
Do not immerse the mill base or any part of it in water or any other type of liquid.
Check the mill for any usable signs of damage, from time to time.
Before use, clean with soft damp cloth.
Do not operate the product empty.
Only use the mill for domestic purposes and as indicated in these instructions.
This product has no user-serviceable parts. Do not attempt to examine or repair this
product yourself. Please review the Warranty Policy on Page 5.
Alkaline batteries are preferred. NOTE: These mills run on 4 AA/LR6 batteries.
BEFORE USE
FILLING YOUR NEW SALT AND PEPPER MILLS
Open the battery housing by turning counterclockwise and by raising up, separating the
top from the bottom.
Remove the transparent protective sleeve and place the batteries into the motor with the
correct polarity as shown in the housing.
Place protective sleeve back over the batteries from the top to keep them from falling out
during operation.
Pull out the battery motor and you will find an opening into the spice chamber.
Fill the spice chamber.
Carefully connect the battery motor back onto the bottom of the mill. Then lock it in.
To close the mill, place the top back over the battery motor to fit along with the bottom
half.
Turn clockwise to lock back into starting position
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
3
USING YOUR SALT AND PEPPER MILLS
Before seasoning your meals, you can adjust the fineness of the ground pepper or salt by
adjusting the wheel on the bottom (underside) of the mills.
Turn the wheel counterclockwise for a coarser grind or clockwise for a finer grind.
While holding the pepper and/or salt mill over your meal, push the button located on top
of the mill. The light function illuminates what you are seasoning and enables the precise
grinding quantity.
Place the bottom cap back on the mill when finished.
MAINTENANCE AND CLEANING
Disassemble the different parts of the mill and clean them separately with a damp cloth.
Do not immerse the mills in liquid or place in a dishwasher.
Do not use cleaning products or detergents.
Keep your salt and pepper mills away from heat or dampness.
Peppercorn Mill Cleaning:
Pepper has oil and with it comes buildup. When Peppercorn builds up, you must take
the grinding mechanism apart. Pay close attention on how you disassemble, so when
you reassemble after cleaning, you place parts back as they were. Try not to press on
the grinder button while assembling back together. Once you have the four pieces apart,
clean the plastic grinding pieces with a soft toothbrush and warm water. You may use a
small amount of liquid dish soup. Dry and assemble back together.
Remove cap, where spice coarseness is adjusted, unscrew coarseness knob by turning
counterclockwise. Place the four pieces as they are disassembled in order of removal.
Clean as instructed above. Dry and place back in order of removal.
BATTERY & TROUBLESHOOTING
If your mill is running sluggish or is not properly operating, check batteries.
Replace with new batteries of the same type and eliminate the old batteries in an
environmentally friendly manner.
If the mill still does not grind, check batteries are installed correctly and are not discharged.
If the mill gets stuck during use, it will hum. The internal shaft will not turn, and no pepper
will grind. Gently tap the mill or shake the mill to remove the stuck salt or pepper.
Pepper does have oil, if your Peppermill becomes sluggish and has new batteries, it may be
time for a cleaning.
If peppercorn is deeply stuck, detach the top half of the mill along with the battery motor
from the bottom as if you were refilling the mill. Turn the adjustment grind setting wheel
to its coarseness setting and tap lightly on a hard surface until the stuck peppercorn is
released. Use the refill opening as support. Once done, put the mill back together and
adjust the coarseness to your desired level.

Produkspesifikasjoner

Merke: Brentwood
Kategori: Ikke kategorisert
Modell: SG-2321S

Trenger du hjelp?

Hvis du trenger hjelp med Brentwood SG-2321S still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Brentwood Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer