CAD Audio WX1610 Bruksanvisning
Les nedenfor 📖 manual på norsk for CAD Audio WX1610 (4 sider) i kategorien Mikrofon. Denne guiden var nyttig for 38 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 19.5 brukere
Side 1/4
©2016 CAD Audio Part No. 62221-03-02 Feb2016
StageSelect
TM
1600 Series
Wireless Microphone System
Manual and
Quick Start-up Guide
Individuals with cardiac pacemakers and other similar medical devices should
consult with their physician before using any RF devices. Though the output level
of this wireless system is below 50 milliwatts, the proximity of the transmitter to the
implant device could pose a threat.
As with any wireless product, environmental conditions can reduce or in some cases
prohibit a successful connection between the transmitter and the receiver.
This device complies with Part 15 of the FCC Rules. Most users of
CAD Audio wireless products in the United States do not need a license for
operation. However, the rules for unlicensed operation state that this device must
not operate in excess of 50 milliwatts and it must not cause harmful interference to
other wireless devices, and must accept interference received from other devices.
Wireless products meeting CAD factory standards adhere to these rules. The
FCC reserves the right to change these rules at any time. For more information
contact the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless
microphone website at:
www.fcc.gov/cgb/wirelessmicrophones
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur)
approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques
de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le
type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication
satisfaisante.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autoris é e aux deux conditions
suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Produkspesifikasjoner
| Merke: | CAD Audio |
| Kategori: | Mikrofon |
| Modell: | WX1610 |
Trenger du hjelp?
Hvis du trenger hjelp med CAD Audio WX1610 still et spørsmål nedenfor, og andre brukere vil svare deg
Mikrofon CAD Audio Manualer
8 Januar 2025
8 Januar 2025
8 Januar 2025
Mikrofon Manualer
- Auna
- Apogee
- Ibanez
- Golden Age Project
- Tascam
- SE Electronics
- Universal Audio
- Synco
- Prodipe
- Sven
- Anywhere Cart
- Glemm
- Shure
- Yamaha
- ClearOne
Nyeste Mikrofon Manualer
18 Oktober 2025
18 Oktober 2025
17 Oktober 2025
16 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025