Cisco 3911 Bruksanvisning

Cisco Telefon 3911

Les nedenfor 📖 manual på norsk for Cisco 3911 (106 sider) i kategorien Telefon. Denne guiden var nyttig for 2 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 1.5 brukere

Last ned PDF

Side 1/106

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Cisco Unified SIP Phone 3911

Administration Guide for Cisco

Unified Communications Manager

6.0 and 5.1

Text Part Number: OL-14029-01

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT

NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT

ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR

THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION

PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO

LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate

radio-frequency energy. If it is not installed in accordance with Cisco’s installation instructions, it may cause interference with radio and television

reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in

part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation.

However, there is no guarantee that interference will not occur in a particular installation.

Modifying the equipment without Cisco’s written authorization may result in the equipment no longer complying with FCC requirements for Class

A or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct

any interference to radio or television communications at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco

equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by

using one or more of the following measures:

• Turn the television or radio antenna until the interference stops.

• Move the equipment to one side or the other of the television or radio.

• Move the equipment farther away from the television or radio.

• Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equipment and the television

or radio are on circuits controlled by different circuit breakers or fuses.)

Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE

PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED

IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL

DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR

INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES.

Produkspesifikasjoner

Merke:	Cisco
Kategori:	Telefon
Modell:	3911
Produkttype:	IP-telefon
Vekt:	505 g
Berøringsskjerm:	Nei
Sertifisering:	FCC 15 (CFR 47) B\nICES-003 B\nEN55022 B\nCISPR22 B\nCISPR24\nAS/NZS CISPR22 B\nVCCI B\nEN55024\nEN50082-1\nEN 61000-3-2\nEN 61000-3-3\nEN 61000-6-1\nEN300386\nKN22 B\nCS-03 - HAC\nFCC 68 (HAC)\nAS/ACIF S004\nAS/ACIF S040\nNZ PTC 220 DR
Støttede nettverksprotokoller:	SIP, DHCP, TFTP
Sikkerhet:	UL 60950, CSA-C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS 60950
DHCP-klient:	Ja
Dimensjoner (B x D x H):	180 x 45 x 200 mm
Skjermoppløsning:	144 x 32 piksler
Produktfarge:	Grå
Driftstemperatur (T-T):	-5 - 40 °C
Oppbevaringstemperaturomåde (Celsius):	-5 - 60 °C
Lagringsrelativ fuktighet:	5 - 90
Samsvar med industristandarder:	IEEE 802.1 p/q, IEEE 802.3af, TIA 810 A
Samtale venter:	Ja
Høyttalertelefon:	Ja
Antall linjer:	2 linjer
Ethernet/bredbåndsforbindelse:	Ja
Relativ luftfuktighet under drift (H-H):	5 - 90
Display:	LCD
Strøm over Ethernet (PoE):	Ja
Mikrofondemping:	Ja
Stemmekodekser:	G.711, G.729, G.729a
Hurtigoppringing:	Nei
Samtale på vent:	Ja
Ringe-ID:	Ja
Gjenoppringing:	Ja
Særegen ringetone/karakteristisk ringetone:	Ja
Konferansesamtaler:	Ja
Kan viderekoble samtaler:	Ja
Ikke forstyrr-funksjon:	Nei
Samtaleanlegg:	Nei
Antall taster på tastatur:	12
Inntasting (on-hook):	Nei