Compustar KP2 Bruksanvisning

Compustar Fjernkontroll KP2

Les nedenfor πŸ“– manual pΓ₯ norsk for Compustar KP2 (2 sider) i kategorien Fjernkontroll. Denne guiden var nyttig for 25 personer og ble vurdert med 3.9 stjerner i gjennomsnitt av 13 brukere

Last ned PDF
Side 1/2
engine back OFF, close the driver’s side door, and re-attempt steps
#1 through #5.
Via DroneMobile App
If your KP-2 touchpad module is installed with a Drone KL1 KeyLocker
system, you can now manage your passcode(s) from the DroneMobile
App. Please visit https://help.dronemobile.com and search β€œKP2”.
KP-2 User Guide (Arming + Disarming)
Arm/Lock - To arm and lock your vehicle’s doors, hold down
the LOCK button for 2.5 seconds - do not press any number.
lock/arm.
Disarm/Unlock - To disarm and unlock your vehicle’s doors,
hold down the LOCK button for 2.5 seconds, then enter your
passcode. NOTE: please press each digit firmly and pause for 1
seconds for two chirps/honks and two parking light flashes,
confirming unlock.
Compatibility (ENGLISH)
CM-X, CM7 Series, and CM-DC3 (Make sure firmware is updated)
Connect to the controller RPS port (white 4-pin).
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜Ž-X: ature Option 3-16 to Setting 2 (KP2), 4-15 for sensitivity. Fe
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΗšΗ½ξ˜Feature Option 3-16 to Setting 2 (KP2), 4-15 for sensitivity.
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΗšΗ–Η“Η“Η½ξ˜Feature Option 3-16 to Setting 2 (KP2).
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΘξ˜…ξ˜„Η–Η½ξ˜ξ˜$($ted Operation
ξ˜„ξ˜ŽΘΗœΗ“Η“ξ˜‚ξ˜”ΗΌξ˜ξ˜„ξ˜ŽΘΗœΗ“Η“ΗΌξ˜ξ˜œ)ξ˜Ÿξ˜ξ˜„ξ˜ŽΗ•Η—Η“Η“ξ˜Θ™ξ˜Žξ˜œke sure firmware is updated)
Connect to the controller UART port (gray 4-pin), using β€˜ANT-Adapt-
er-KP2’ (included in kit).
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΗœΗ“Η“ξ˜”/AS: ature Option 4-11 to Setting 3 (KP2), 4-15 for Fe
sensitivity.
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΗ•Η—Η“Η“Η½ξ˜ +/$*)ξ˜Η–ΘΗ“Η”ξ˜ //$)"ξ˜Η•ξ˜Θ™ξ˜Œξ˜‘Η•ΘšΗΌξ˜Η–ΘΗ“Η–ξ˜Featur to Se for
sensitivity.
Mounting & Installation
1) The KP2 touchpad module should be mounted on the front
windshield on the interior, driver’s side. Thoroughly clean and dry the
intended surface.
2) Connect the 4-pin harness prior to mounting.
3) Remove the protective film on the KP2 touchpad module, exposing
the adhesive.
4) Firmly adhere the KP2 touchpad module to the interior of the
windshield at your desired placement. Hold the module in place for
ξ˜ξ˜ξ˜ξ˜ξ˜Η–Η“ξ˜. conds.
KP2 Programming and Passcode Reset
Via Touchpad Module
1) Using your vehicle’s key, turn the ignition to the ON position. You do
not need to start the engine. Then, open the driver’s side door and
leave it open.
2) Press and hold the LOCK button the KP2 touchpad module for 2.5
seconds.
3) If your system has a siren, it will lightly chirp and the red LED will
blink, indicating programming mode.
4) Firmly tap in the first digit of your new passcode. The LED will blink
green when input is received, and then red (with siren chirp) when it
is safe to enter the next digit. Repeat this process until you have
entered all 4/6 digits.
5) Once you have entered all of the digits, please wait until you hear
another siren chirp and see a single parking light flash. This indicates
that programming was complete and successful.
a) If programming is incomplete and/or fails, you will receive three
siren chirps and three parking light flashes. If this occurs, turn your
Compatibilité (FRANÇAIS)
CM-X, CM7 Series, et CM-DC3 (assurez ous que le micrologiciel est mis Γ  -v
jour)
Connecter au port RPS du contrΓ΄leur (blanc Γ  quatre broches).
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜Ž-X : Option de fonction 3-16 au glage 2 (KP2), 4-15 pour la rΓ©
sensibilitΓ©.
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΗšξ˜Η½ξ˜ξ˜+/$*) fonction 3-16 au glage 2 (KP2), 4-15 pour la rΓ©
sensibilitΓ©.
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΗšΗ–Η“Η“ξ˜Η½ξ˜ξ˜+/$*) fonction 3-16 au glage 2 (KP2).rΓ©
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΘξ˜…ξ˜„Η–ξ˜Η½ξ˜Fonctionnement limitΓ©
ξ˜„ξ˜ŽΘΗœΗ“Η“ξ˜‚ξ˜”ΗΌξ˜ξ˜„ξ˜ŽΘΗœΗ“Η“ΗΌξ˜ /ξ˜ξ˜„ξ˜ŽΗ•Η—Η“Η“ξ˜Θ™ξ˜œ..0e rez-vous que le micrologiciel est mis
Γ  jour)
Connectez ous au port UART du contrΓ΄leur (gris Γ  quatre broches), en -v
utilisant 'ANT-Adapter-KP2' (inclus dans le trousse).
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΗœΗ“Η“ξ˜”/AS : Option de fonction 4-11 au glage 3 (KP2), 4-15 rΓ©
pour la sensibilitΓ©.
ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜ξ˜Θ—ξ˜ξ˜ξ˜„ξ˜ŽΗ•Η—Η“Η“ξ˜Η½ξ˜ξ˜+/$*)  *)/$*)ξ˜Η–ΘΗ“Η”ξ˜ξ˜œ0 ξ˜Η•ξ˜Θ™ξ˜Œξ˜‘Η•ΘšΗΌξ˜Η–ΘΗ“Η–ξ˜+*0-'f rΓ©glag
sensibilitΓ©.
Montage et installation
1) Le module du pavΓ© tactile KP-2 doit Γͺtre montΓ© sur le pare-brise
Programming &
Operation Manual
CM-900
CM-900AS
CM2400
CM-X
CM7 Series
CM-DC3
White
Gray
(ANT-Adapter-KP2)
Red LED
Green LED

Produkspesifikasjoner

Merke: Compustar
Kategori: Fjernkontroll
Modell: KP2

Trenger du hjelp?

Hvis du trenger hjelp med Compustar KP2 still et spΓΈrsmΓ₯l nedenfor, og andre brukere vil svare deg


Fjernkontroll Compustar Manualer

Compustar

Compustar KP2 Bruksanvisning

16 Oktober 2024

Fjernkontroll Manualer

Nyeste Fjernkontroll Manualer

Alpine

Alpine RUE-M300 Bruksanvisning

20 Oktober 2025
JL Audio

JL Audio MMR-40 Bruksanvisning

19 Oktober 2025
JL Audio

JL Audio MMR-20-BE Bruksanvisning

19 Oktober 2025
Telefunken

Telefunken TRC 850 Bruksanvisning

18 Oktober 2025
Rockford Fosgate

Rockford Fosgate Punch PMX-BTUR Bruksanvisning

17 Oktober 2025
Telefunken

Telefunken TRC 400 Bruksanvisning

16 Oktober 2025
MB Quart

MB Quart N1-RC Wireless Bruksanvisning

16 Oktober 2025
Velleman

Velleman IREXT Bruksanvisning

15 Oktober 2025
Hama

Hama Universal Remote 00221064 Bruksanvisning

13 Oktober 2025
DS18

DS18 MBKR Bruksanvisning

10 Oktober 2025