Crestron TSR-302-BTP Bruksanvisning

Les nedenfor 📖 manual på norsk for Crestron TSR-302-BTP (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 27 personer og ble vurdert med 3.6 stjerner i gjennomsnitt av 14 brukere

Side 1/2
DO GUIDE
DO Check the Box
QTY PRODUCT PART NUM.
1 TSR-302-BTP Battery Pack for TSR-302 2039523
3. Lift the old TSR-302-BTP out of the battery compartment, as shown in the following
photograph.
DO Install the New Battery
After completing the removal of the old TSR-302-BTP from the touch screen remote, perform
the following procedure to install the TSR302-BTP in a TSR-302:
photograph.
2. Reattach the battery compartment cover by pressing down lightly on the locking tab while
sliding the cover into place.
DO Charge the Battery
Install the TSR-302-BTP in the TSR-302 touch screen remote and mount it in an ac-powered
TSR-302-DS Table Dock.
TSR-302-BTP
Battery Pack for TSR-302
DO Remove the Battery
To remove the existing TSR-302-BTP from a TSR-302, perform the following procedure:
1. Remove the battery compartment cover on the rear of the TSR-302 by using two thumbs
and gently pressing in the direction of the arrow shown in the following photograph.
2. Place the touch screen remote on a clean, soft surface, with the screen side down.

Produkspesifikasjoner

Merke: Crestron
Kategori: Ikke kategorisert
Modell: TSR-302-BTP

Trenger du hjelp?

Hvis du trenger hjelp med Crestron TSR-302-BTP still et spørsmål nedenfor, og andre brukere vil svare deg