CyberPower RCCARD100 Bruksanvisning
CyberPower
Ikke kategorisert
RCCARD100
Les nedenfor 📖 manual på norsk for CyberPower RCCARD100 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 13 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 7 brukere
Side 1/2
Copyright © 2021 Cyber Power Systems, Inc. All rights reserved.
2
31
INSTALLATION GUIDE
3. Insert and tighten the
retaining screws.
4. Connect an Ethernet cable to
the Ethernet port of the
Remote Cloud Card.
2. Install the Remote Cloud
Card into the expansion slot.
1. Remove the two retaining
screws from the expansion
slot, and remove the cover.
Step 1. Hardware Installation
Definitions for the LED Indicators
Step 2. Application Installation
Install the “POWERPANEL” application available for download on
the Apple App Store or Google Play, then launch the application.
Figure 1
Step 3. Sign Up and Login, as shown in Figure 1
Step 4. Add a device in the POWERPANEL app
1. Click “+” in the upper right corner of the homepage, as shown in
Figure 2.
Figure 2
iOS Android
Tx/Rx
Link
RCCARD100
CyberPower
Tx/Rx
RCCARD100
CyberPower
Link LED color
O
On (Yellow)
Tx/Rx LED color
O
On (Green)
Flashing
Condition
The Remote Cloud Card is not connected to the
Network/ or the Remote Cloud Card power is o.
The Remote Cloud Card is connected to the Network.
The Remote Cloud Card power is o.
The Remote Cloud Card power is on.
- Receiving/transmitting data packet
- Reset finished
Quick Start Guide
REMOTE CLOUD CARD
RCCARD100
REMOTE CLOUD CARD
RCCARD100
NOTE: The Remote Wireless Cloud Card is
hot-swappable, so you do not need to turn o the
device to install it.
QR Code
LINK Indicator Tx/Rx Indicator
Ethernet Port
Cloud
Figure 3
2. Locate the “Add Device by QR Code” to add your Remote Cloud Card.
3. Scan the QR Code on the Remote Cloud Card you are adding.
If the QR Code scan was successful, click “Add” and name the
device you are monitoring.
4. After the setup is completed, you will see your device on the
homepage, as shown in Figure 3.
Produkspesifikasjoner
| Merke: | CyberPower |
| Kategori: | Ikke kategorisert |
| Modell: | RCCARD100 |
Trenger du hjelp?
Hvis du trenger hjelp med CyberPower RCCARD100 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert CyberPower Manualer
13 Oktober 2025
12 Oktober 2025
1 Oktober 2025
25 Januar 2025
21 Januar 2025
8 Januar 2025
8 Januar 2025
8 Januar 2025
4 Januar 2025
4 Januar 2025
Ikke kategorisert Manualer
- Salta
- Cambium Networks
- Govee
- Sunny
- Bulgin
- Laine
- Technical Pro
- Sedona
- Sloan
- Fire Sense
- Pro-Ject
- Hamax
- Eliminator Lighting
- AVPro Edge
- ICE Watch
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025