D-Link ANT70-CB1RN Bruksanvisning

Les nedenfor 📖 manual på norsk for D-Link ANT70-CB1RN (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 22 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 11.5 brukere

Side 1/2
System Requirements
Install the surge protection adapter. (For exten-
sion use, you can install with optional ANT24-
CB03N, ANT24-CB06N, or ANT24-CB09N low
loss cables per needs.)
Step 1
Step 2
Step 3 (If needed)
1
indoor AP use only.
If you would like to connect your outdoor antenna to outdoor AP,
please use another type of extension cable like ANT70-CB1RN
or ANT70-CB1N required to be attached to outdoor AP.
Remove the default antenna from your device.
Step 4
When install the surge protection adapter
to cables, please wrap the connectors by
enclosed water-proof tape tightly.
Connect the extension cable
1
/antenna
onto the external connector on device.
The surge protection adaptor from outdoor antenna
packaging is for the connection to the lighting protection
system (grounding) of buildings. All devices are protected
by the grounding to avoid the lighting strikes. It protects
your precise WLAN equipment from high voltage surges
caused by discharge and transients from the antenna.
D-Link Antenna-kit Installation Guide
INSTALLATION

Produkspesifikasjoner

Merke: D-Link
Kategori: Ikke kategorisert
Modell: ANT70-CB1RN

Trenger du hjelp?

Hvis du trenger hjelp med D-Link ANT70-CB1RN still et spørsmål nedenfor, og andre brukere vil svare deg