Eizo DuraVision FDSV1201T Bruksanvisning

Eizo skjerm DuraVision FDSV1201T

Les nedenfor 📖 manual på norsk for Eizo DuraVision FDSV1201T (51 sider) i kategorien skjerm. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/51

Important

Please read this User’s Manual, and the Setup Manual (separate

volume) carefully to familiarize yourself with safe and e󰀨ective usage.

• Please refer to the Setup Manual for basic information ranging from

connection of the monitor to a PC to using the monitor.

• The latest User’s Manual is available for download from our web site:

http://www.eizoglobal.com

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

e󰀨ort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

Notice for this monitor

Aside from creating documents, viewing multimedia content, and other general purposes, this product is also

suited to the dedicated usages such as operation of terminal equipment.

This product has been adjusted specically for use in the region to which it was originally shipped. If the

product is used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

· Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to

the composition of the rubber. Check the desk surface before use.

It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more

after the monitor power has been turned on, and then adjust the monitor.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and

maintain a stable display.

When the screen image is changed after displaying the same image for extended periods of time, an

afterimage may appear. Use the screen saver or power save function to avoid displaying the same image for

extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer

to “Cleaning” (page 4)).

The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may

appear on the LCD panel, this is not a malfunction. Percentage of e󰀨ective dots: 99.9994% or higher.

The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker,

please contact your local EIZO representative.

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do

not attempt to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew

condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the

monitor on. Instead wait until the dew condensation disappears, otherwise it may cause some damage to

the monitor.

(Cautions for the Use of the Touch Panel)

• During touch operation

Be careful of the following points. Otherwise, damage may occur to the monitor.

Do not strongly press, scratch, or poke the panel.

Do not touch the panel with hard objects such as ballpoint pens or metals.

Produkspesifikasjoner

Merke:	Eizo
Kategori:	skjerm
Modell:	DuraVision FDSV1201T
Type baklys:	LED
Berøringsskjerm:	Ja
Synsvinkel, horisontal:	160 °
Skjermform:	Flat
DVI-port:	Ja
Strømforbruk (maks.):	12 W
Sertifisering:	CB, CE, cTUVus, FCC-B, Canadian ICES-003-B, TUV/S, VCCI-B, ECM, EAC, RoHS, WEEE, China RoHS
HDCP:	Ja
Skjermteknologi:	LCD
Innebygd kamera:	Nei
AMD FreeSync:	Nei
NVIDIA G-SYNC:	Nei
Antall oppstrømsporter:	1
Berøringsskjermteknologi:	Resistive
Kontrastforhold:	700:1
AC-inngangsspenning:	100-240 V
AC-inngangsfrekvens:	50 - 60 Hz
Skjermoppløsning:	800 x 600 piksler
Strømforbruk (standby):	0.5 W
Produktfarge:	Grå
Type strømforsyning:	AC
Bredde (uten stativ):	299 mm
Høyde (uten stativ):	239 mm
Vekt (uten stativ):	2200 g
Skjermdiagonal:	12.1 "
Berøringsskjermtype:	Tabletop
Separat H/V-synkronisering:	Ja
Antall DVI-D-porter:	1
Kabler inkludert:	USB, VGA
RS-232-port:	1
Strømforbruk (vanlig bruk):	4 W
Antall VGA (D-Sub)-porter:	1
Driftstemperatur (T-T):	0 - 50 °C
VESA-montering:	Ja
Dybde (uten stativ):	55.5 mm
Synsvinkel, vertikal:	140 °
Kan monteres på vegg:	Ja
Relativ luftfuktighet under drift (H-H):	20 - 90
Lysstyrke for skjerm:	360 cd/m²
Oppdateringsresponstid:	10 ms
Pikselbredde:	0.3075 x 0.3075 mm
Panelmonterbart grensesnitt:	100 x 100 mm
Display antall farger:	16.78 million farger
Størrelseforhold:	4:3
Bildestørrelse, horisontal:	246 mm
Bildestørrelse, vertikal:	184.5 mm
Dreietapp/dreiemekanisme:	-35 - 35 °
Synlig skjermområde (HxB):	246 x 184.5 mm
Uten tungmetall:	Hg (kvikksølv)
Stativ:	Nei