Elba ETC-E2700 Bruksanvisning
Les nedenfor 📖 manual på norsk for Elba ETC-E2700 (1 sider) i kategorien Kran. Denne guiden var nyttig for 21 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 11 brukere
Side 1/1
1. Install the intake (A) on the wall.
2. Put the tape(C) around the screw threaded tube, cover the rosette (B) and screw into pipeline.
3. Connect water and check if the screw has been sealed tightly.
pipeline
●Before installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0 C - 90 C˚ ˚
-Water pressure between 0.05MPa – 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure di erences between hot and cold water ff
supply
●Flush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
●Inspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
●Use thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
ETC-E2700
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Cold Water Tap
Produkspesifikasjoner
| Merke: | Elba |
| Kategori: | Kran |
| Modell: | ETC-E2700 |
Trenger du hjelp?
Hvis du trenger hjelp med Elba ETC-E2700 still et spørsmål nedenfor, og andre brukere vil svare deg
Kran Elba Manualer
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Kran Manualer
- Karran
- InSinkErator
- Oras
- Franke
- Oliveri
- Billi
- Delta
- Hansgrohe
- Graff
- Blanco
- Biltema
- Axor
- Symmons
- Rogerseller
- IKEA
Nyeste Kran Manualer
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025