Fluke 1550C Bruksanvisning

Fluke måleinstrument 1550C

Les nedenfor 📖 manual på norsk for Fluke 1550C (24 sider) i kategorien måleinstrument. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/24

September 2010 Rev. 2, 6/20

All product names are trademarks of their respective companies.

1550C/1555

Insulation Tester

Calibration Manual

Limited Warranty and Limitation of Liability

Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The

warranty period is three years and begins on the date of shipment. Parts, product repairs, and services are warranted for

90 days. This warranty extends only to the original buyer or end-user customer of a Fluke authorized reseller, and does

not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion, has been misused, altered,

neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that

software will operate substantially in accordance with its functional specifications for 90 days and that it has been

properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without

interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have

no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if product is

purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke reserves

the right to invoice Buyer for importation costs of repair/replacement parts when product purchased in one country is

submitted for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or

replacement of a defective product which is returned to a Fluke authorized service center within the warranty period.

To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization

information, then send the product to that service center, with a description of the difficulty, postage and insurance

prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will be

returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused by neglect,

misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including overvoltage failures

caused by use outside the product’s specified rating, or normal wear and tear of mechanical components, Fluke will

provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product

will be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation

charges (FOB Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,

INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY

CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of

incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any

provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction,

such holding will not affect the validity or enforceability of any other provision.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

11/99

Table of Contents

Title Page

Introduction ........................................................................................................ 1

Contact Fluke ..................................................................................................... 2

Safety Information .............................................................................................. 2

Required Equipment .......................................................................................... 2

Performance Test Procedures ........................................................................... 4

IR Port Verification Test ................................................................................. 4

Button Test .................................................................................................... 5

Display Test ................................................................................................... 6

Charging Test ................................................................................................ 7

Insulation Accuracy Test ................................................................................ 7

Output Voltage Test ....................................................................................... 9

Short Circuit Current Test .............................................................................. 9

Voltage Measurement Accuracy .................................................................... 10

Adjustment Procedure ....................................................................................... 10

Interface Connection ...................................................................................... 10

Instrument Setup ........................................................................................... 11

Normalizing the HV Probe and Digital Multimeter ......................................... 11

HV Adjustment ............................................................................................... 11

Current Adjustment ........................................................................................ 12

Charge Adjustment ........................................................................................ 12

Additional Procedures ........................................................................................ 12

Identification (Id) ............................................................................................ 12

Clear Non-volatile Memory ............................................................................ 12

Restart DUT ................................................................................................... 12

Shutdown DUT .............................................................................................. 13

Get Diagnostics ............................................................................................. 13

Query Constants ............................................................................................ 13

Save / Print html Page ................................................................................... 13

Battery Replacement Procedure ........................................................................ 14

Disassembly .................................................................................................. 15

Re-assembly .................................................................................................. 15

Cleaning ............................................................................................................. 16

Replacement Parts/Accessories ........................................................................ 16

Specifications ..................................................................................................... 17

General Specifications ................................................................................... 17

Electrical Specifications ................................................................................. 18

Principle of Measurement and Resistance ........................................................ 19

Produkspesifikasjoner

Merke:	Fluke
Kategori:	måleinstrument
Modell:	1550C
Vekt:	3700 g
Bredde:	269 mm
Dybde:	277 mm
Høyde:	160 mm
Batteriteknologi:	Forseglet blysyre (VRLA)
Antall støttede batterier:	1
Driftstemperatur (T-T):	-20 - 50 °C
Oppbevaringstemperaturomåde (Celsius):	-20 - 65 °C
Driftshøyde:	0 - 2000 m
Internasjonal beskyttelses (IP)-kode:	IP40
AC-spenningsområde:	250 - 5000 V
Relativ luftfuktighet under drift (H-H):	0 - 80
Dekselfarge:	Grey, Yellow
Beskyttelse mot overbelastning:	Ja
Maksimum spenning:	5000 V