Fluke i6000s Flex Bruksanvisning

Fluke måleinstrument i6000s Flex

Les nedenfor 📖 manual på norsk for Fluke i6000s Flex (8 sider) i kategorien måleinstrument. Denne guiden var nyttig for 10 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 5.5 brukere

Side 1/8
i 6000s Flex
AC Current Probe
Instruction Sheet
Introduction
The i6000s 24 Flex and i6000s 36 Flex C P s (tAC urrent robe he
Probe) are used with oscilloscopes, digital multimeters, recorders
or data loggers. can be used to measure AC current PThe robes
up to 6000 A. The flexible measuring head allows current
measurements on conductors that are hard to reach or
The Probes provide a low voltage (3- V ac) output that is
proportional to the current being measured. The provideProbes
full-scale direct readings for 60 A, 600 A, and 6000 A.
Safety Instructions
A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the
equipment under test.
 Warning
To prevent electric shock or personal injury:
If the Probes are used in a manner not
specified in these operating instructions,
protection provided by the Probes may be
impaired.
Use the Probes only if qualified.
Use caution during installation and use of the
Probes; high voltages and currents may be
present in circuit under test.
Have maintenance performed by only qualified
service personnel.
Protect the Probes against water and
humidity.
PN 2842359
June 200 7, Rev. 2 6/21 ,
©2007 20- 21 Fluke Corporation. All rights reserved.
S pecifications are subject to change without notice.
All product names are trademarks of their respective companies.

Produkspesifikasjoner

Merke: Fluke
Kategori: måleinstrument
Modell: i6000s Flex

Trenger du hjelp?

Hvis du trenger hjelp med Fluke i6000s Flex still et spørsmål nedenfor, og andre brukere vil svare deg