Fluke LVD2 Bruksanvisning

Fluke Multimeter LVD2

Les nedenfor 📖 manual på norsk for Fluke LVD2 (3 sider) i kategorien Multimeter. Denne guiden var nyttig for 19 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 10 brukere

Last ned PDF

Side 1/3

LVD2

VoltAlert

Safety Sheet

Read First: Safety Information

WX Warning

To prevent possible electric shock, ﬁ re, or personal injury:

● Use the Product only as speciﬁ ed, or the protection supplied by the Product

can be compromised.

● Do not rely on the Product to detect the presence or absence of voltage on

a conductor for safety purposes. A single pole non-contact voltage detector

such as this Product is not suitable to determine if a circuit is hazardous. A

volt meter or 2-pole voltage detector is necessary to conﬁ rm the absence of

hazardous voltage prior to commencing work.

● Do not use if the ﬂ ashlight does not operate.

● Detect a known voltage ﬁ rst to make sure that the Product operates correctly.

● When using the Product if tip does not glow, voltage could still be present.

The Product indicates active voltage in the presence of electric ﬁ elds of

suﬃ cient strength generated from the source (MAINS) voltage. If the ﬁ eld

strength is low, the Product may not provide indication of live voltages. Lack

of an indication occurs if the Product is unable to sense the presence of

voltage which may be inﬂ uenced by several factors including, but not limited

to:

• Shielded wire/cables

• Thickness and type of insulation

• Distance from the voltage source

• Fully-isolated users that prevent an eﬀ ective ground

• Receptacles in recessed sockets/ diﬀ erences in socket design

• Condition of the Product and Batteries

● Disable the Product if it is damaged.

● Do not use the Product if it is damaged.

● Use Product with arrow visible.

● Hold the Product behind the tactile barrier.

● Do not use for dc voltage detection or around voltages exceeding

600 volts, or in the presence of variable motor drives.

● Use caution with voltages above 30 V ac as a shock hazard may exist.

● Do not stare or look directly at the LED ﬂ ash light. The light is extremely

bright.

● Comply with local and national safety codes. Use personal protective

equipment (approved rubber gloves, face protection, and ﬂ ame-resistant

clothes) to prevent shock and arc blast injury where hazardous live

conductors are exposed.

● Batteries contain hazardous chemicals that can cause burns or explode. If

exposure to chemicals occurs, clean with water and get medical aid.

● Remove the batteries if the Product is not used for an extended period of time,

or if stored in temperatures above 50 °C. If the batteries are not removed,

battery leakage can damage the Product.

● Carefully read all instructions.

● Read all safety information before you use the Product.

PN 4572337 September 2014 Rev. 1, 10/19

FOR USE BY COMPETENT

PERSONS

Anyone using this instrument should be

knowledgeable and trained about the risks

involved with measuring voltage, especially

in an industrial setting, and the importance of

taking safety precautions and of testing the

instrument before and after using it to ensure

that it is in good working condition.

Produkspesifikasjoner

Merke:	Fluke
Kategori:	Multimeter
Modell:	LVD2
Innebygd skjerm:	Nei
Sertifisering:	CE
Antall per pakke:	1 stykker
Inngangsspenning (maks.):	600 V
Produktfarge:	Black, Yellow
Driftstemperatur (T-T):	0 - 50 °C
Inngangsspenning (min.):	90 V
Lommeklemme:	Ja