Frosty Factory 217A Bruksanvisning
Les nedenfor 📖 manual på norsk for Frosty Factory 217A (29 sider) i kategorien Iskremmaskin. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/29
1
Frosty Factory
of America, Inc.
2301 S. Farmerville St., Ruston, LA 71270
frostyfactory.com
(318) 255-1162 (800) 544-4071 (318) 255-1170 fax
Owner’s Manual
All technical data, pictures and drawings contained in this manual are not
binding on the manufacturer nor can the manufacturer be held liable for any
modifications to the machine in whole or in part. Revised 12/2023
Model 217
2
TABLE OF CONTENTS
1.0 INTRODUCTION
1.1 Use of the Manual
1.2 Preliminary Inspection
1.3 Description
1.4 Dimensions
2.0 LOCATION AND INSTALLATION
2.1 Safety Precautions
2.2 Installation
3.0 OPERATION
3.1 Machine Controls
3.2 The Product You Serve
3.3 Product Consistency
3.4 Start Up
3.5 Freeze Time
4.0 MAINTENANCE
4.1 Cleaning
4.2 Re-Assembly
4.3 Preventative Maintenance
4.4 Extended Storage
4.5 Troubleshooting
4.6 Rear Cylinder and Drive Assembly Parts List
4.7 Torque Consistency Control
4.8 Faceplate/Faucet Assembly
4.9 Float Switch
4.9a Thermostat Assemblies
4.10 Using the Cleaning Brushes
4.11 Beater Bar Spring and Seal Installation
4.12 Beater Seal Assembly
4.13 Ceramic Seal Removal and Re-installation
5.0 SPARE PARTS LIST
6.0 BOX LAYOUT
7.0 ELECTRICAL DRAWING
8.0 FACTORY ASSISTANCE
9.0 WARRANTY
3
SECTION 1
INTRODUCTION
1.1 USE OF THIS MANUAL
Your service manual has been prepared as a guide to help you get the most from your Frozen
Drink Machine. It contains information about the installation and operation of your machine.
The manual also contains instructions for service and care. The manual should be read carefully
by the operator of the Frozen Drink Machine to become familiar with the machine and the
correct operating procedures described within. The following notations are used throughout the
manual to bring important facts to your attention:
“Warning” - This notation is used whenever the personal safety of the operator(s) might be
jeopardized, if procedures are not followed correctly.
“Caution” - This notation is used whenever the operator may receive or cause injury if not
observed.
“Notice” - This notation is used to bring important information to your attention that will
enhance the performance of your machine.
CAUTION
RISK OF ELECTRICAL SHOCK.
DISCONNECT POWER
BEFORE SERVICING UNIT.
CAUTION
MOVING PARTS
DO NOT OPERATE UNIT
WITH PANELS REMOVED
WARNING
DO NOT INSERT ANY OBJECTS
INTO CYLINDER OR HOPPER WHILE
MACHINE IS RUNNING!
2 Beater Bars, 1 Drip Tray with insert, 2
Faceplates, 8 Faceplate Knobs, 2 Hopper
Covers,2 Petro-Gel, 2 Sanitizer, 4 Faucet O-
Rings, 1 Wire Brushes.
1.2 PRELIMINARY INSPECTION
Unpack the unit as soon as possible upon
its arrival. Check the entire machine and
its contents for possible shipping damage.
Note damage, if any, and notify your
carrier immediately. Frosty Factory of
America cannot be held responsible for
damaged merchandise caused by shipping.
Inventory the accessories to be sure they
include the items you specified on your
order. Normally the accessories include:
Produkspesifikasjoner
| Merke: | Frosty Factory |
| Kategori: | Iskremmaskin |
| Modell: | 217A |
Trenger du hjelp?
Hvis du trenger hjelp med Frosty Factory 217A still et spørsmål nedenfor, og andre brukere vil svare deg
Iskremmaskin Frosty Factory Manualer
25 August 2025
Iskremmaskin Manualer
- Iskremmaskin Royal Catering
- Iskremmaskin Exquisit
- Iskremmaskin Café
- Iskremmaskin Danby
- Iskremmaskin Ninja
- Iskremmaskin Kogan
- Iskremmaskin Gorenje
- Iskremmaskin Sencor
- Iskremmaskin GE
- Iskremmaskin Kenwood
- Iskremmaskin Cuisinart
- Iskremmaskin Avanti
- Iskremmaskin Wilfa
- Iskremmaskin Innoliving
- Iskremmaskin Manitowoc
- Iskremmaskin Unold
- Iskremmaskin Clatronic
- Iskremmaskin Hoshizaki
- Iskremmaskin Avantco
- Iskremmaskin Magimix
- Iskremmaskin Essentiel B
- Iskremmaskin Vollrath
- Iskremmaskin Ice-O-Matic
- Iskremmaskin Follett
Nyeste Iskremmaskin Manualer
3 September 2025
3 September 2025
3 September 2025
3 September 2025
3 September 2025
2 September 2025
2 September 2025
1 September 2025
1 September 2025
1 September 2025